What's the resistance on injectors
09-14-02, 09:54 PM
#1
The Addiction of Wankel
Thread Starter
iTrader: (5)
Join Date: Nov 2001
Location: Bakersfield
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
What's the resistance on injectors
I have a Jan. 87 rex and I was putting in new injectors. Before I put them in, I tested them for their resistance and got 13 ohms, these are on the primary side. I thought the resistance was supposed to be 1.5 to 3 ohms??? I tested the secondary side and they were 2.4 ohms, which is in the 1.5 to 3 range. Are the primaries supposed to be in that range or are they supposed to be 13 ohms.
Thanks
Thanks
09-15-02, 01:07 AM
#3
Senior Member
iTrader: (5)
Join Date: Nov 2001
Location: St. Louis, Mo
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Should be the same. Look under the airbox (filter) for a silver metal thing about 3" long. If you have it, the injectors should be 'low' impedance (1.5- 3). They are much easier to find. The 'high' impedance ones are worth a little more.
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM