What are your AFL Readings?
What are your AFL Readings?
What are peoples AFL reading on your SAFC? I was reading about 50% at full throttle in fifth going about 120. It usually reads about 20-30% just cruising. Just curious to know what other peoples are.
With a stock intake system & fairly free flowing exhaust, I can bump 50% on my S4 NA at WOT at high RPM.
What were the mods on the one with 68%? I would think you'd need significant work to get that much airflow. ... unless it was a turbo.
-=Russ=-
What were the mods on the one with 68%? I would think you'd need significant work to get that much airflow. ... unless it was a turbo.
-=Russ=-
Originally Posted by Syonyk
With a stock intake system & fairly free flowing exhaust, I can bump 50% on my S4 NA at WOT at high RPM.
What were the mods on the one with 68%? I would think you'd need significant work to get that much airflow. ... unless it was a turbo.
-=Russ=-
What were the mods on the one with 68%? I would think you'd need significant work to get that much airflow. ... unless it was a turbo.
-=Russ=-
True duals, K&N intake and stock manifolds/engine
Originally Posted by Mindspin311
I hit 82% during a 2nd gear pulls regularly, saw 83% once during a cold night
Go to the afm. Push the cone all the way back with the key to ON and observe what the reading is. See if it will go to 100percent. If it does, then I'd repeat going from full closed to full open several times and at each end I'd hold the cone there for a minute or so. I'm guessing it might be a learning experience for the SAFC. Just guessing.
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
Oct 7, 2015 04:04 PM
befarrer
Adaptronic Engine Mgmt - AUS
3
Sep 22, 2015 09:33 AM



