What will happen if I put Tein S-techs on my stock shocks?
01-15-05, 02:42 AM
#1
Senior Member
Thread Starter
Join Date: Jul 2004
Location: California
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
What will happen if I put Tein S-techs on my stock shocks?
What will happen if I put Tein S-techs on my stock shocks???
I think my shocks are still pretty good (at least the car doesnt sag at all??)
I think my shocks are still pretty good (at least the car doesnt sag at all??)
01-15-05, 02:59 AM
#2
Haven't we ALL heard this
Beats me...but it sounds like a bad idea.
However, your car sagging or not sagging has nothing to do with your struts. That is the spring. The strut just manages the rebound control of the spring.
James
However, your car sagging or not sagging has nothing to do with your struts. That is the spring. The strut just manages the rebound control of the spring.
James
01-15-05, 07:58 PM
#3
Full Member
iTrader: (1)
Join Date: Dec 2002
Location: Richmond, VA
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
If you put too stiff of a spring for a specific strut the strut will not be able to control the dampening, leading to a dead strut.
What are the spring rates for the S-Techs?
Pat
What are the spring rates for the S-Techs?
Pat
01-15-05, 09:43 PM
#4
Senior Member
Thread Starter
Join Date: Jul 2004
Location: California
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
:: Body: FC3S
:: Spring Rate Front: 2.1/117 (gf/mm, lbs/in)
:: Spring Rate Rear: 2.4/134 (gf/mm, lbs/in)
:: Ride Height Front: -25 (mm), -1 (inch)
:: Ride Height Rear: -24.5 (mm), -1 (inch)
:: Spring Rate Front: 2.1/117 (gf/mm, lbs/in)
:: Spring Rate Rear: 2.4/134 (gf/mm, lbs/in)
:: Ride Height Front: -25 (mm), -1 (inch)
:: Ride Height Rear: -24.5 (mm), -1 (inch)
Thread
Thread Starter
Forum
Replies
Last Post
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM
MILOS7
3rd Generation Specific (1993-2002)
7
08-25-15 07:37 PM
