what now, interior lights blown
#1
1.3L is not that small
Thread Starter
what now, interior lights blown
ok im having some major ******* problems with my car not getting any spark. i pull the ecu out after not getting any volts at the brown/white wire at the pressure sensor. i noticed on the 10 pin emission pin on the ecu was missing the b/w wire, it was corroded off, i cannot seem to see in the wiring diagrams what exactly this wire does. anyhow as i was putting the ecu back in to do one last test this wire that was corroded off touches the ecu which was grounded and bam a spark and then my dome lights went out. what caused this? does the ecu control the dome lights or is that another computer? thanks in advance
christopher
christopher
#2
1.3L is not that small
Thread Starter
ok thanks to some searching i found out it blew the room fuse and not the illumination fuse so my interior lights now work.... now does anybody know what that b/w wire was for and would it cause no spark?
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM