what lip to get on this bumper? S5 tII cut front bumper
03-12-07, 08:53 PM
#1
what lip to get on this bumper? S5 tII cut front bumper
Ok I'm looking at the corksport Odura front lip or the corksport MS front lip. What do you guys think? I've been into go so much that I forgot how show looks on this car.
03-12-07, 11:51 PM
#5
Full Member
Join Date: May 2002
Location: Olympia WA
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
OdooooLa - I have one - hellp me drifto better 
Really though, I think it's the best looking lip unless you want to pay for the feed lip - keep i mind though, it eats up alot more ground clearance than the ms front lip - ask me how i found out ;P
Really though, I think it's the best looking lip unless you want to pay for the feed lip - keep i mind though, it eats up alot more ground clearance than the ms front lip - ask me how i found out ;P
03-13-07, 08:09 AM
#7
The corksport lip isn't a bad lip at all.. but the fitting could be a little better. I'm not saying it's outrageously horrible, but some of the holes don't line up as well as it could, especially where there are holes in the lip that were put there to make clearance for other bolts... kind of hard to explain 
but I'm more than willing to take photos of it if you like. From the outside, the fitting is very tight, so it might not even be a big problem at all. I've noticed that when I brake regularly, my lip will scrape, but it's something i can live with because the lip is so damn sexy
but I'm more than willing to take photos of it if you like. From the outside, the fitting is very tight, so it might not even be a big problem at all. I've noticed that when I brake regularly, my lip will scrape, but it's something i can live with because the lip is so damn sexy
Trending Topics
03-13-07, 08:47 AM
#8
Rotary Enthusiast
Join Date: Feb 2005
Location: Norway
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
Nice modded s5 bumper, hondahater. I am actually cutting my one almost like yours (maybe more) and i also need a lip. Can someone post pics of the lips metioned i this thread?
Sindre
Sindre
03-13-07, 09:18 AM
#9
Interruptor Illuminada
Join Date: Apr 2006
Location: MD
Posts: 1,504
Likes: 0
Received 0 Likes
on
0 Posts
Look at this thread:
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/s5-jspec-front-bumper-lighting-s4-614586/
It has just about every lip for the FC.
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/s5-jspec-front-bumper-lighting-s4-614586/
It has just about every lip for the FC.
03-13-07, 09:19 AM
#10
I have injector envy!
I have the Odula and love it, it is super low so I am afraid to slame my car like it used to be. With now lip and sideskirts I was tucking tire on my 16's with a 45 series sidewall.
You have to cut out the lower bumper bar to make the odula lip complete but it totally changes the front look of the REX
You have to cut out the lower bumper bar to make the odula lip complete but it totally changes the front look of the REX
03-13-07, 11:19 AM
#11
nice! yeah any pics you guys can provide of your own cars, especially if they are black but really doesn't matter would be fantabulous. Thanks guys!
is this lip
http://cgi.ebay.com/ebaymotors/JDM-8...spagenameZWDVW
and this lip
http://cgi.ebay.com/FC3S-RX7-Front-L...em130087813319
the same thing?
is this lip
http://cgi.ebay.com/ebaymotors/JDM-8...spagenameZWDVW
and this lip
http://cgi.ebay.com/FC3S-RX7-Front-L...em130087813319
the same thing?
Last edited by hondahater; 03-13-07 at 11:37 AM.
03-13-07, 12:06 PM
#12
Here's a shot of what I was talking about.. the bolts not lining up with the holes for space:
..but besides that, visually from the outside, gaps are barely noticable, especially on a black car:
Excuse my dirty car, spring time hit us hard so the streets are filled with water from the melted snow
From Corksport, it's not a bad lip. My experience with them has been very good also.
..but besides that, visually from the outside, gaps are barely noticable, especially on a black car:
Excuse my dirty car, spring time hit us hard so the streets are filled with water from the melted snow
From Corksport, it's not a bad lip. My experience with them has been very good also.
03-13-07, 12:16 PM
#13
rotary abortionist
i like mine it was in that link above with all the other lips i have a stock s5 lip, now its on a cut out s4 bumper and i think it looks better...for aftermarket i would still go with mazdaspeed if you had the money
-pat
-pat
03-13-07, 03:00 PM
#15
I have injector envy!
my corsport lines up perfectly...was your car ever in an accident?? Also I would just cut the part that doesnt line up off. And I wish it was made of thicker fiberglass, but I am going to reinforce it in a few places but my car is gonna be much lower than that white one^^
