2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

What the hell?!?! Ongoing saga

Thread Tools
 
Search this Thread
 
Old 08-28-06, 07:43 AM
  #1  
pjh
Full Member

Thread Starter
 
pjh's Avatar
 
Join Date: Feb 2006
Location: Florida
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
What the hell?!?! Ongoing saga

Please forgive my disjointed rambling. This morning, I'm getting no power from the car. Engine revs fine in driveway, with a slight "shake" around 1500 RPM. Car seems extra loud. When I start driving, Car revs to around 2000, then bogs and doesn't want to get out of it's own way. Ran tach up to 4000, no increase in speed. HELP!

-Paul
Old 08-28-06, 08:10 AM
  #2  
Senior Member

iTrader: (1)
 
marclong's Avatar
 
Join Date: Mar 2002
Location: Jefferson , Ga
Posts: 392
Likes: 0
Received 0 Likes on 0 Posts
Sounds lile limp mode. Check engine light coming on?
Old 08-28-06, 08:33 AM
  #3  
pjh
Full Member

Thread Starter
 
pjh's Avatar
 
Join Date: Feb 2006
Location: Florida
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
No check engine light. But the car backfires on decel. I know there has been a small exhaust leak. I'm wondering if the leak has worsened.

-Paul
Old 08-28-06, 11:54 AM
  #4  
pjh
Full Member

Thread Starter
 
pjh's Avatar
 
Join Date: Feb 2006
Location: Florida
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
The turbo has had a bit of an oil leak and is about to be replaced. I suppose it's possible that it gave up the ghost finally, but I don't know if that would cause the symptoms I'm having. Is that just wishful thinking?

The way things have been going with this beast, Hurricane Ernesto will blow the damn thing into my neighbor's house and I'll have to pay to tow the broken car out of his living room.

-Paul
Old 08-30-06, 03:52 PM
  #5  
pjh
Full Member

Thread Starter
 
pjh's Avatar
 
Join Date: Feb 2006
Location: Florida
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
Anybody? Really hope I'm not looking at a blown motor here. Any input would be very welcome.

-Paul
Old 08-30-06, 04:13 PM
  #6  
Junior Member

 
Longhaul's Avatar
 
Join Date: May 2006
Location: Dawsonville
Posts: 44
Likes: 0
Received 0 Likes on 0 Posts
I had one like that. It would rev fine in the driveway. Even up to 7K rpm. Once I tried to move forward, there was no power. Could not climb a moderate hill.

Turned out to be the front rotor... rebuild time.
Old 08-30-06, 04:15 PM
  #7  
Senior Member

 
Boostmaniac's Avatar
 
Join Date: Mar 2006
Location: Louisville, Ky
Posts: 675
Likes: 0
Received 0 Likes on 0 Posts
You need to perform a compression test ASAP to determine if you have experienced a seal failure. If the compression test is fine, you can breathe easier and start looking for the problem.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
djSL
The Bad & Fugly Businesses
24
09-21-17 03:09 AM
R.O.D
2nd Generation Specific (1986-1992)
34
01-06-16 12:09 AM
R.O.D
Rtek Forum
1
09-23-15 01:15 AM



Quick Reply: What the hell?!?! Ongoing saga



All times are GMT -5. The time now is 07:43 AM.