what do we do?
#1
Full Member
Thread Starter
Join Date: Jul 2005
Location: Utah
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
what do we do?
My friend has an 88 TII.
-Stage 3 streetport
-full 2.5'' exhaust
-some ignition work
-dowl pinned motor
Basically the block itself is ready for some major power but he doesn't have the other mods to do so. I'm not too familiar with the 2nd gens and what mods you need to do what seeing that I am a 3rd gen guy.
He is probably getting a hybrid S4 turbo with larger compressor wheel and ported wastegate that should handle upto 350hp. Also two 1680cc secondary injectors with fuel rail.
I know he will need a computer and probably a clutch.
Can he run 550 primary's when trying to run roughly 350-400whp with type of port job?
But what else will he need?
Suggestions would be much appreciated.
-Stage 3 streetport
-full 2.5'' exhaust
-some ignition work
-dowl pinned motor
Basically the block itself is ready for some major power but he doesn't have the other mods to do so. I'm not too familiar with the 2nd gens and what mods you need to do what seeing that I am a 3rd gen guy.
He is probably getting a hybrid S4 turbo with larger compressor wheel and ported wastegate that should handle upto 350hp. Also two 1680cc secondary injectors with fuel rail.
I know he will need a computer and probably a clutch.
Can he run 550 primary's when trying to run roughly 350-400whp with type of port job?
But what else will he need?
Suggestions would be much appreciated.