2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

what could be causing my secondary injectors to not come on?

Thread Tools
 
Search this Thread
 
Old Sep 13, 2002 | 11:57 PM
  #1  
jacobcartmill's Avatar
Thread Starter
just dont care.
Tenured Member 20 Years
iTrader: (6)
 
Joined: Jul 2002
Posts: 9,387
Likes: 4
From: Nashville, TN
what could be causing my secondary injectors to not come on?

If i am accelerating lightly i can get above 4k rpms easily. if i step on it, my secondaries try to come on and it just bogs my car and no accel... i checked the plugs and even replaced the secondaries with some good used ones. what could be causing this? i miss my boost...
Reply
Old Sep 14, 2002 | 12:25 AM
  #2  
AreExSeven's Avatar
Huh?
Tenured Member 10 Years
 
Joined: Nov 2001
Posts: 1,087
Likes: 0
From: Lost
The 3800 RPM Hesitation my friend. Do a search for it. Plenty of stuff.

The reason it works when you accelerate slowly is it has plenty of time to think about it. When you go fast it doesn't have the time so it stalls there for a second. If I remember correctly, the main cause is bad electrical grounds. But just do a search
Reply
Old Sep 14, 2002 | 12:41 AM
  #3  
jacobcartmill's Avatar
Thread Starter
just dont care.
Tenured Member 20 Years
iTrader: (6)
 
Joined: Jul 2002
Posts: 9,387
Likes: 4
From: Nashville, TN
it doesnt just hesitate bro, the bitch stops.
Reply
Old Sep 14, 2002 | 01:24 AM
  #4  
jimmyv13's Avatar
Round&Round not Up&Down
Tenured Member 15 Years
 
Joined: Aug 2001
Posts: 2,805
Likes: 0
From: West Bloomfield, MI
Start with grounding your boost sensor,or ground pin 2C at the ECU. Adding extra chassis to engine and battery to chassis grounds might help, too.
Reply
Old Sep 14, 2002 | 04:18 AM
  #5  
Turbo II FC's Avatar
Total Balance is Key
Tenured Member: 20 Years
iTrader: (14)
 
Joined: Jul 2002
Posts: 1,196
Likes: 6
From: Texas
I have the same problem right now. Ive had this problem for a while. I took everything off and messed with the injector clips on the harness for the injectors and it worked for a while. Then one day it stops working again. So I then buy brand new connectors since the harness was kinda beat up. It did no good. So Im not sure what to think now. Im thinking that the secondaries might be clogged or need to be cleaned but then again someone said they had this problem and replaced the boost sensor and it was running perfect. I really need to fix this **** too.
Reply
Old Sep 14, 2002 | 11:24 AM
  #6  
jacobcartmill's Avatar
Thread Starter
just dont care.
Tenured Member 20 Years
iTrader: (6)
 
Joined: Jul 2002
Posts: 9,387
Likes: 4
From: Nashville, TN
hmm.. i'll go try replacing my presure sensor.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
bryancmatthews
Power FC Forum
14
Oct 5, 2015 08:49 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM




All times are GMT -5. The time now is 10:08 AM.