Looking to replace all of my bleeders. Its an 88 GXL with 4 piston calipers.
Can i buy the bleeders localy? If so, what's their size?

If i go with Speed Bleeders, which one do I use.??

Do I use six SB8100 or six SB7100 ???

Thanks.

LoS

 

i'm pritty sure it's 8x1.0mm by 34mm long front and 7x1.0mm by 34mm rear. thats what i bought so hopefully they will work

 

6 bleeders? 1 for each wheel and 1 for the clutch (5 total)....did i miss one?

john

 

there are actually 7 total.

1 on each front 4 piston caliper (2 total)
2 on each rear caliper (4 total)
1 on the clutch (1)

=7 Total.

 

wth is the point f having 2 rear bleeders? I just ordered 4, 2 front 2 rear

 

top bleeder is for getting the air out of the system when you change fluid, bottom is for when lines are replaced or the caliper is new as far as I know.

 

so a pair of 8x100 in the front
and two pairs of 7x100s for the rear?

 

ttt

 

just ask the place where your getting them from. they should have an application list