Weird sound with ig on
#1
Newbie
Thread Starter
Join Date: Oct 2006
Location: Netherlands
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Weird sound with ig on
My Rx-7 Turbo 2 is making a weird vibrating sound with the ignition turned on.
I removed the i/c to see what could be causing this , but i have no idea where its coming from.
It seems to get a bit worse when you play with the throttle.
And it only seems to do this when the engine is warmed up.
http://video.google.com/videoplay?do...14923562070407
Anyone know what might be doing this?
And i have a little problem when the car idles , sometimes it misfires between 800 and 2000 rpm and the whole car shakes when this happens.
I removed the i/c to see what could be causing this , but i have no idea where its coming from.
It seems to get a bit worse when you play with the throttle.
And it only seems to do this when the engine is warmed up.
http://video.google.com/videoplay?do...14923562070407
Anyone know what might be doing this?
And i have a little problem when the car idles , sometimes it misfires between 800 and 2000 rpm and the whole car shakes when this happens.
#2
Newbie
Thread Starter
Join Date: Oct 2006
Location: Netherlands
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I just did the tps adjustment with the 2 leds method , and checked the resistance when the engine is hot and it was a bit out of spec.
So i have set it correctly , but i dont notice any difference and it still misfires sometimes at idle.
And i think the bac valve is making that vibrating sound , not sure but when i gently tap on it with the back of a screwdriver the sound changes.
Could a bad bac valve cause slight misfires at idle? and this sound?
So i have set it correctly , but i dont notice any difference and it still misfires sometimes at idle.
And i think the bac valve is making that vibrating sound , not sure but when i gently tap on it with the back of a screwdriver the sound changes.
Could a bad bac valve cause slight misfires at idle? and this sound?
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM