i wanna run the pcv to prevent sludge but i removed the charcoal canister and no rats nest. i have no intake, just a filter on the turbo.
what i did so far was a ran a line from the oil fillter neck and another hose from the intermediate plate vent to a catch can.
the can has only two ports. so i drilled and tapped the top part to put a fitting.

now my question is do i just vent it with a filter? run a line from top ftting to a vac port? or make a intake pre-turbo and put it there?

 

?

 

You can open vent it or tap the inlet on the turbo for a vacuum source.