voltage of coils
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Roughly 30,000V. Why do you need to know this? Measuring can be done with a high voltage probe. You can get one from most real electronics shops. They are normally used to diagnose flyback transformer problems with TVs.
#3
Senior Member
Thread Starter
Join Date: Mar 2001
Location: trinidad, West indies
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
coil change
i asked this cause i want to know if i ran two seperate MSD Blaster coils on the leading how much better would it work ,these coils are rated at 45000 volts compared to 30000 volts on the stock coils.
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
3
09-28-15 09:25 PM
killerrx710
Adaptronic Engine Mgmt - AUS
5
09-28-15 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
09-24-15 10:57 PM