2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Vibrations at 1k to 3k

Thread Tools
 
Search this Thread
 
Old Aug 28, 2002 | 06:17 PM
  #1  
LoSRx7's Avatar
Thread Starter
Senior Member
Tenured Member: 20 Years
 
Joined: Sep 2001
Posts: 378
Likes: 0
From: Western Massachusetts
Vibrations at 1k to 3k

Anyone have this prob or know what it could be???
At idle from 1k to 3k i feel a vibration on the steering wheel and a little on the shifter. I look at the engine and it doesn't shake at all, and u can't feel any vibrations. Only on the steering wheel and a bit on the shifter. Anyone know whats up?? Just started happening 2 days ago, and the car is driving fine that i know of. Hope someone can help.

LoS
Reply
Old Aug 28, 2002 | 06:36 PM
  #2  
CrackHeadMel's Avatar
Learned alot | Alot to go
Tenured Member 20 Years
iTrader: (2)
 
Joined: Apr 2002
Posts: 4,232
Likes: 0
From: Rotaryland, New Hampshire
Mabya wheel out of balance, my wheel shaked alot at low rpm's/speeds when mine was out of balance

-Jacob
Reply
Old Aug 28, 2002 | 07:07 PM
  #3  
HOZZMANRX7's Avatar
Driving RX7's since 1979
Tenured Member 20 Years
iTrader: (43)
 
Joined: Aug 2001
Posts: 6,096
Likes: 9
From: So Cal where the OC/LA/SB counties meet
At Idle, good question.

Driving down the road:

Shaking steering wheel, has to be alignment, tire out of balance or out of round, bent wheel perhaps (but not likely)

Shaking shifter, bad tranny mount most likely. Maybe bad U joint shaking things up.

But shaking only at 1-3 K? I dunno.............
Reply
Old Aug 28, 2002 | 07:39 PM
  #4  
Ryde _Or_Die's Avatar
...
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 7,539
Likes: 0
From: Tampa, FL
It doesn't vibrate at all while driving? Hmm, weird. If it starts to you might wanna look into a new driveshaft.
Reply
Old Aug 28, 2002 | 10:39 PM
  #5  
LoSRx7's Avatar
Thread Starter
Senior Member
Tenured Member: 20 Years
 
Joined: Sep 2001
Posts: 378
Likes: 0
From: Western Massachusetts
My sub smokes one evening, so i take it out. Next morning i get this stupid vibration. I'm not positive if it shakes while moving, but i'll let u know tomorow. My car prob misses my sub.

Thx guys
LoS
Reply
Old Aug 29, 2002 | 06:37 AM
  #6  
CrackHeadMel's Avatar
Learned alot | Alot to go
Tenured Member 20 Years
iTrader: (2)
 
Joined: Apr 2002
Posts: 4,232
Likes: 0
From: Rotaryland, New Hampshire
Doah, my bad, i missed the "viberates at idle"


Shake at idle? is it a rough idle?

Question: If your motor mounts were bad would the engine rock or move more even while idling?

Im not expert but thats what came to my head
Reply
Old Aug 29, 2002 | 08:39 AM
  #7  
LoSRx7's Avatar
Thread Starter
Senior Member
Tenured Member: 20 Years
 
Joined: Sep 2001
Posts: 378
Likes: 0
From: Western Massachusetts
Question: If your motor mounts were bad would the engine rock or move more even while idling?
The engine doesn't shake at all.

At idle u feel a little vibration. Feels like when u spin a ball in a loop. U can sense something spinning around. Something like that. At idle u can barely feel it, but as it goes above 1k towards 3k the feeling gets faster and faster and when it goes over 3k u can't feel it hardly at all.

While driving u can feel it a bit, but its tough to tell because of the bumps on the street and i have a full suspension, so i feel every little thing. But the car pulls fine and goes fine. I just hope its nothing serious, but i can't figure it out I'm having a rough week!!!!

LoS
Reply
Old Sep 9, 2002 | 10:28 AM
  #8  
LoSRx7's Avatar
Thread Starter
Senior Member
Tenured Member: 20 Years
 
Joined: Sep 2001
Posts: 378
Likes: 0
From: Western Massachusetts
Can't Anybody help?? Anyone have pics of where the tranny mount is???? Thx

LoS
Reply
Old Sep 9, 2002 | 11:01 AM
  #9  
blu_gxl's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Feb 2002
Posts: 230
Likes: 0
From: rock me amadeus...
did you check the tention of all your belts?? it could be a loose or worn belt or tentioner that could explain why you feel it go away at higher rpm. other than that BIG MAYBE leading coil it's probably not but doesn't hurt to check
Reply
Old Sep 9, 2002 | 11:12 AM
  #10  
Josepi's Avatar
Despise Enmity
Tenured Member 20 Years
 
Joined: May 2001
Posts: 2,420
Likes: 0
From: Richmond, VA
Just curious, is the vibration load dependant? IE WOT shakes more than decel?
Reply
Old Sep 9, 2002 | 11:38 AM
  #11  
LoSRx7's Avatar
Thread Starter
Senior Member
Tenured Member: 20 Years
 
Joined: Sep 2001
Posts: 378
Likes: 0
From: Western Massachusetts
After 3k/ 3.5k you don't feel **** Maybe it is my belts. I'm going to check it out.

LoS
Reply
Old Sep 9, 2002 | 01:16 PM
  #12  
Rotorific's Avatar
I dont know a damn thing
Tenured Member 10 Years
iTrader: (1)
 
Joined: May 2001
Posts: 1,703
Likes: 1
From: Evans, Ga
IF your rolling then its out of balance and you need a front end alignment a key way to see is if your wheel shakes which it does so go get a 40 buck alignment not a $130 because rx7s rarely go out of alignment so its not really worth 130 unless you feel it is peace
Reply
Old Sep 9, 2002 | 02:39 PM
  #13  
LoSRx7's Avatar
Thread Starter
Senior Member
Tenured Member: 20 Years
 
Joined: Sep 2001
Posts: 378
Likes: 0
From: Western Massachusetts
PHEW FOUND OUT THE PROB
the alternator wasn't bolted on 100%
i forgot the nut on the back bolt. All set.

LoS
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DaleJK
New Member RX-7 Technical
1
Aug 31, 2015 10:19 AM
MasteRX
2nd Generation Specific (1986-1992)
11
Dec 3, 2001 01:43 AM




All times are GMT -5. The time now is 08:00 PM.