Vibration
Thread Starter
Junior Member
Joined: Aug 2002
Posts: 37
Likes: 0
From: Rapid City SD
Vibration
Ok so I have my car back together and I put in the "stiffer" engine mounts from RX7.com and replaced the tranny x member bushings with the Banzia Racing poly ones. I noticed that from 2500-3000 rpms that I'm getting a vibration, is this normal? Should I start looking for a problem. I'm also seeing about 18psi oil pressure at 600rmp.
Little info
Rotary Aviation apex seal
New bearings
Act HD PP with 6 puck disc
Atkins thremal pellet
Street port
Little info
Rotary Aviation apex seal
New bearings
Act HD PP with 6 puck disc
Atkins thremal pellet
Street port
i am legendary
Joined: Sep 2003
Posts: 8,478
Likes: 1
From: Kirkland, WA
For the vibration, I don't know about those mounts specifically but my completely solid aluminum mounts cause noticeable vibration and it gets excessive at about 55mph and up. Take that for what its worth.
Seduced by the DARK SIDE
Joined: Apr 2001
Posts: 7,323
Likes: 2
From: Orange Park FL (near Jax)
Next time you get a chance to look underneath, check the U-joints.
They should look solid black.
If you see any brown or rust colored deposits on the U-joints, they are failing.
They should look solid black.
If you see any brown or rust colored deposits on the U-joints, they are failing.
Thread
Thread Starter
Forum
Replies
Last Post