Vacuum Diagrams
#1
Full Member
Thread Starter
Join Date: Aug 2004
Location: Dublin, CA
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Vacuum Diagrams
I have searched on google and here for two hours and could not find a vacuum
diagram for my turbo II. I have a repair manual but it sucks.
Does anybody have one or know a site that does?
diagram for my turbo II. I have a repair manual but it sucks.
Does anybody have one or know a site that does?
#3
Full Member
Thread Starter
Join Date: Aug 2004
Location: Dublin, CA
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
thanks felix.
There is a cluster of five or six lines on the passenger side of the motor between the tranny and down pipe coming out of the back side of the engine. i have tried and tried to figure out where they go. If you have a diagram for that or if anybody else does that would be the coolest thing since sliced bread.
There is a cluster of five or six lines on the passenger side of the motor between the tranny and down pipe coming out of the back side of the engine. i have tried and tried to figure out where they go. If you have a diagram for that or if anybody else does that would be the coolest thing since sliced bread.
#4
Keep Right Except to Pass
Dang, Felix, I would love to see one of those wonderful colored jobs for the S4 Turbo car.
For the life of me I can't tell what the third nipple down on the firewall side of the expansion chamber is supposed to go to. My fresh engine runs good in the shop so far with it capped. Thing is I don't remember disconnecting anything from there when I dissasembled. Although, among all the leftover parts I found a vacuum cap that I've never seen before. Either my memory is failing horribly or the garage is infested with malicious goblins.
Gassrx - have you checked out the FSM yet? Those look like they go to the solenoid rack, but you'll have to try to trace them yourself. I think a description of it from me would do more harm than good. ha ha
For the life of me I can't tell what the third nipple down on the firewall side of the expansion chamber is supposed to go to. My fresh engine runs good in the shop so far with it capped. Thing is I don't remember disconnecting anything from there when I dissasembled. Although, among all the leftover parts I found a vacuum cap that I've never seen before. Either my memory is failing horribly or the garage is infested with malicious goblins.
Gassrx - have you checked out the FSM yet? Those look like they go to the solenoid rack, but you'll have to try to trace them yourself. I think a description of it from me would do more harm than good. ha ha
#5
Full Member
Thread Starter
Join Date: Aug 2004
Location: Dublin, CA
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
i have all the vac lines connected in the solenoid rack, the ones im having trouble with are the ones coming out the back near the firewall, i think most of them go to the acv, but i cant figure out which one goes where.
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM