Vaccum lines part #'s
04-09-04, 01:54 PM
#2
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
Well, for the most part, you can just buy silicone vaccume line and start replacing.. however, there is a vaccume spider for the oil injectors that you can get from Mazdatrix.
04-09-04, 02:04 PM
#3
The oil injectors are useless to buy. Just reuse the 4 into 1 piece and use some silcone hose.
Everything else is just a few inches of hose. Buy a few feet and cut it to size.
I went to Autozone and bought a Blue silicone kit. Comes with a few different sizes.
Everything else is just a few inches of hose. Buy a few feet and cut it to size.
I went to Autozone and bought a Blue silicone kit. Comes with a few different sizes.
04-09-04, 03:30 PM
#4
Senior Member
Join Date: Oct 2001
Location: Grand Rapids, MI
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
04-09-04, 03:44 PM
#5
meh
Join Date: Sep 2002
Location: Tallahassee
Posts: 801
Likes: 0
Received 0 Likes
on
0 Posts
I had replaced all mine with rubber hoses. Less than a year later, I bought the red silicon hose kit from hose techniques. When I went to replace the rubber hoses, some had already hardened up (I can only guess from the heat). I'd say go with the silicon if you can, then just cut to size.
Thread
Thread Starter
Forum
Replies
Last Post
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM