2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Update on my projects (dialup = no)

Thread Tools
 
Search this Thread
 
Old Sep 3, 2004 | 01:42 AM
  #1  
SonicRaT's Avatar
Thread Starter
Super Raterhater
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Dec 2001
Posts: 10,630
Likes: 3
From: NY, MA, MI, OR, TX, and now LA or AZ!
Update on my projects (dialup = no)

Got kind of camera happy, and haven't really posted much of what I've been upto. Pretty much here's a pic of my garage and the FC's lined up.



Here's a couple of pics of my s5 GXL-II (TurboII conversion) It's been out due to some body damage, which is a whole other story. In the meantime it's getting a BNR Stage3 hybrid, custom intercooler (probably Years of Decay setup). Nothing real special here... Just lots of problems!



Engine shot (yeah, i know, fix the rust!)




Alright, here's my '87 Sport 6-port Turbo. Nothing too much to inform you on this one, it's basically got the new clutch (clutchnet sprung 6puck with 2600lb pp). As you can see in the pictures below, it's basically getting a makeover. The previous owner rolled it and pretty much mangled the body. So, as you can see, a set of new fenders, headlight assemblies, rear bumper, a shitload of all metal (greatest body filler ever!), and it's starting to look normal again. As you can see, I've got a boost gauge, a/f gauge, and the wideband mounted right in the middle of the gauge cluster so I can make sure I don't go killing my poor motor.





Here's my starion front mounted, ignore the busted up plastic.
Reply
Old Sep 3, 2004 | 01:50 AM
  #2  
Impreza2RX7's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Jun 2003
Posts: 1,424
Likes: 1
From: Millville, NJ
I have dialup and those pics dled in like 5 seconds, lol.. I'd get rid of the Starion intercooler. My buddy had one on his Omni GLH and he said it sucked major ***..
Reply
Old Sep 3, 2004 | 01:50 AM
  #3  
SonicRaT's Avatar
Thread Starter
Super Raterhater
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Dec 2001
Posts: 10,630
Likes: 3
From: NY, MA, MI, OR, TX, and now LA or AZ!
Engine shot


Alright, here's my GTUs. As you all know, this is my supercharger project. As it stands, I'm working on a pulley setup, I've got most of the supercharger mounting taken care of, and working on my TB adapter to mount the stock TB. Here are a couple of shots of the FC3S side skirts just set in place.





Alright, if that can't get me to the power levels I want, this will! Chevy 409!



Shot of my toolboxes/etc.


Anybody need sparkplugs?
Reply
Old Sep 3, 2004 | 01:52 AM
  #4  
MoReRyCe's Avatar
As in More-Food
Tenured Member 05 Years
 
Joined: Jul 2004
Posts: 239
Likes: 0
From: Corona, CA
i need some spark plugs.. send em my way
Reply
Old Sep 3, 2004 | 01:53 AM
  #5  
SonicRaT's Avatar
Thread Starter
Super Raterhater
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Dec 2001
Posts: 10,630
Likes: 3
From: NY, MA, MI, OR, TX, and now LA or AZ!
Originally Posted by Impreza2RX7
I have dialup and those pics dled in like 5 seconds, lol.. I'd get rid of the Starion intercooler. My buddy had one on his Omni GLH and he said it sucked major ***..
It works fine for my needs, my intake temps stay pretty good even at 12psi.

As for the spark plugs, that's not even half of them. I've got about another 20 in various boxes around my garage. Don't ask how i've obtained so many.
Reply
Old Sep 3, 2004 | 02:41 AM
  #6  
marlaman's Avatar
Need an E6x
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 842
Likes: 0
From: Phoenix, AZ
Is that chevy engine out of an old suburban?

Matt
Reply
Old Sep 3, 2004 | 02:51 AM
  #7  
ddub's Avatar
i am legendary
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 8,478
Likes: 1
From: Kirkland, WA
Pictures dont show
Reply
Old Sep 3, 2004 | 02:54 AM
  #8  
marlaman's Avatar
Need an E6x
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 842
Likes: 0
From: Phoenix, AZ
They do for me want me to describe them for you in huge detail?? LOL!

M
Reply
Old Sep 3, 2004 | 02:56 AM
  #9  
ddub's Avatar
i am legendary
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 8,478
Likes: 1
From: Kirkland, WA
What the hell!? I right click them and say show picture, and go to properties and copy/paste the URL into the address line and can't get them to show up!!
Reply
Old Sep 3, 2004 | 03:16 AM
  #10  
SonicRaT's Avatar
Thread Starter
Super Raterhater
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Dec 2001
Posts: 10,630
Likes: 3
From: NY, MA, MI, OR, TX, and now LA or AZ!
Your isp hates me, remove the www. infront of sonicrat.org and it'll work. That engine isn't from a suburban, it's from the old chevy impalas/etc. It's one of the most sought after chevy blocks. Don't you guys remember the beach boys song about the 409?
Reply
Old Sep 3, 2004 | 03:19 AM
  #11  
ddub's Avatar
i am legendary
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 8,478
Likes: 1
From: Kirkland, WA
They show now, weird..
Reply
Old Sep 3, 2004 | 03:22 AM
  #12  
j200pruf's Avatar
RIP Icemark
Tenured Member 05 Years
iTrader: (4)
 
Joined: Oct 2002
Posts: 1,481
Likes: 1
From: Aloha OR
So none of your 7's are n/a any more SRat. Looks awsome keep up the good work.
Reply
Old Sep 3, 2004 | 03:31 AM
  #13  
SonicRaT's Avatar
Thread Starter
Super Raterhater
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Dec 2001
Posts: 10,630
Likes: 3
From: NY, MA, MI, OR, TX, and now LA or AZ!
The GTUs is for a very short time, until I can get the pulleys setup at least.
Reply
Old Sep 3, 2004 | 03:32 AM
  #14  
marlaman's Avatar
Need an E6x
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 842
Likes: 0
From: Phoenix, AZ
Originally Posted by SonicRaT
Your isp hates me, remove the www. infront of sonicrat.org and it'll work. That engine isn't from a suburban, it's from the old chevy impalas/etc. It's one of the most sought after chevy blocks. Don't you guys remember the beach boys song about the 409?
Ok i was just curious on the engine because i helped my dad rebuild an engine when i was about 3 (i really didn't do a whole lot aside form take apart an intake component, and yes i have proof of this) but i remmeber in the pictures the engine was oarnge originally.

Matt
Reply
Old Sep 3, 2004 | 03:34 AM
  #15  
SonicRaT's Avatar
Thread Starter
Super Raterhater
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Dec 2001
Posts: 10,630
Likes: 3
From: NY, MA, MI, OR, TX, and now LA or AZ!
Haha, it's chevy orange! Most chevy blocks are painted this color.
Reply
Old Sep 3, 2004 | 07:13 AM
  #16  
Travis R's Avatar
trying to build a racecar
Tenured Member 15 Years
 
Joined: Sep 2002
Posts: 580
Likes: 1
From: Austin, Tx.
"My four speed, dual quad, posi-traction 409"
Reply
Old Sep 3, 2004 | 09:38 AM
  #17  
ultradef's Avatar
Ready to Rock
Tenured Member: 20 Years
 
Joined: Jun 2002
Posts: 729
Likes: 0
From: Bergen County, NJ
Now thats a nice garage! Full of 3 FCs with forced induction and a shitload of tools. Very nice.
Reply
Old Sep 3, 2004 | 10:07 AM
  #18  
zeromage428's Avatar
BWAAA
Tenured Member 10 Years
 
Joined: Jan 2004
Posts: 1,167
Likes: 0
From: sofla-this isnt naxxramas
i want a garage like that!!!
Reply
Old Sep 3, 2004 | 01:02 PM
  #19  
drft_180sx's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 702
Likes: 0
From: NYC/Stony Brook Univ.
I want your garage and only one of your cars, pleeeease???

Guess not, anyway, where in NY are you located?
Reply
Old Sep 3, 2004 | 03:18 PM
  #20  
SonicRaT's Avatar
Thread Starter
Super Raterhater
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Dec 2001
Posts: 10,630
Likes: 3
From: NY, MA, MI, OR, TX, and now LA or AZ!
When I'm in NY, I'm in the Syracuse area. My garage is in Michigan however. I've got enough tools to fill about 3 boxes, air, you name it, it's in there somewhere. Mig welder's coming next week, after that I just need a plasma cutter! There's also a '63 Impala sharing the garage, but it's hidden in the corner. It fits in nicely with the rx7's, simply because of this:

Reply
Old Sep 3, 2004 | 03:41 PM
  #21  
Parastie's Avatar
Mountain Rotary Mod
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 2,411
Likes: 0
From: Freaking Poland!!
I'd really like to see pictures of the SC stuff you have finished!!
Reply
Old Sep 3, 2004 | 04:42 PM
  #22  
Rx7MPGUY84's Avatar
Rpm abuser
Tenured Member 05 Years
 
Joined: Oct 2003
Posts: 780
Likes: 0
From: New Port Richey, FL
that sc stuff wasnt in there last time i was in your car sonicrat. haha. what did u ever do with that totalled 7 with the rebuilt t2. sell the motor with the car, or junk the car and kept the motor?
Reply
Old Sep 3, 2004 | 05:43 PM
  #23  
SonicRaT's Avatar
Thread Starter
Super Raterhater
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Dec 2001
Posts: 10,630
Likes: 3
From: NY, MA, MI, OR, TX, and now LA or AZ!
Haha, that's the GXL in the pictures, we fixed it all up and it's driving just fine.
Reply
Old Sep 3, 2004 | 06:00 PM
  #24  
RXciting's Avatar
GrapefruitRacing?
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 2,155
Likes: 0
From: PartSource
Originally Posted by SonicRaT
When I'm in NY, I'm in the Syracuse area. My garage is in Michigan however. I've got enough tools to fill about 3 boxes, air, you name it, it's in there somewhere. Mig welder's coming next week, after that I just need a plasma cutter! There's also a '63 Impala sharing the garage, but it's hidden in the corner. It fits in nicely with the rx7's, simply because of this:


only difference in this pic is he's probably using the help of some propane or spark plugs in the exhaust or both.. we do it aeu naturel! (check sp plz)
Reply
Old Sep 3, 2004 | 08:09 PM
  #25  
SonicRaT's Avatar
Thread Starter
Super Raterhater
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Dec 2001
Posts: 10,630
Likes: 3
From: NY, MA, MI, OR, TX, and now LA or AZ!
Yeah yeah, ether and spark plugs with model T coils. But the 7's dont discriminate too much. Was my dad's car, one of the last years he got to drive it.
Reply



All times are GMT -5. The time now is 05:43 AM.