alright everyone,

87 na swapped to 91 jdm TII

turn signals didn't work and lights and yadda yadda.

got pretty much everything working again...except the turn signals aren't clicking on and off and i cant hear the clicking from the relay (i believe that's what it is).

i believe the problem all along (including the lights on the gauges not working and some of the gauges themselves not working) is because of the swap between series (s4 to s5)

the cluster switches aren't interchangeable between the series. i hate that madness...

so i need to know if you guys think its the relay or could it be that the hazard switch is hooked up in series with the turn signal switch and is messing with the circuit.

if someone out there can check unplug their hazard switch and then still use their turn signals that would give me a little better idea.

or if anyone knows how to go about fixing this problem i'd be very appreciative.

thanks guys!

 

don't have an s5 hazard switch, but my s4 crapper the horn doesn't work, problem with cold solder joints.. same computer (i think anyway) different circuit cards... I got it to work for a while by taking it out and cleaning the boards with contact cleaner.. quit again though, maybe it will work for you

 

naw man i need an s4 hazard switch