2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Turn signal poblem found.

Thread Tools
 
Search this Thread
 
Old 11-27-07, 10:54 PM
  #1  
Junior Member

Thread Starter
 
1fst7's Avatar
 
Join Date: Feb 2007
Location: Salina, Ks.
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Turn signal poblem found.

If your box clicks and nothing happenes on the dash or outside, check the connections on the fuse box. My problem was solved after pulling the hazard fuse half out. Of course all of the fuses were pulled and checked but the connection on the back side or in the fuse box itself appears to be the problem, the connections to the box were okay but may not be in your case. Hope this helps and thank you forum for your help also. Jim.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
Farkel
3rd Generation Specific (1993-2002)
4
09-16-15 06:16 PM
The1Sun
New Member RX-7 Technical
5
09-15-15 04:45 PM
m_haiser
2nd Generation Specific (1986-1992)
1
09-13-15 04:21 PM



Quick Reply: Turn signal poblem found.



All times are GMT -5. The time now is 04:58 AM.