2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

turn signal help!

Thread Tools
 
Search this Thread
 
Old Dec 19, 2006 | 06:51 PM
  #1  
jamless's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 69
Likes: 0
From: cinn ohio
turn signal help!

I have one turn signal working one that makes a clicking sound and does not work. Any ideas? any help would be apperciated before the cops get me thanks
Reply
Old Dec 19, 2006 | 06:55 PM
  #2  
mazdaverx713b's Avatar
Have RX-7, will restore
Veteran: Army
Tenured Member: 20 Years
Loved
Community Favorite
iTrader: (91)
 
Joined: Oct 2003
Posts: 22,577
Likes: 1,273
From: Ohio
sounds like a poor connection(but make sure your bulbs are good). try pulling the assembly and checking the connections at the housing and the connector. i've never had this prolem, this is just where i would personally start.
Reply
Old Dec 19, 2006 | 07:06 PM
  #3  
Dak's Avatar
Dak
Information Regurgitator
Tenured Member: 25 Years
Liked
Loved
Community Favorite
 
Joined: Feb 2001
Posts: 1,994
Likes: 208
From: Sparta TN. United States
Originally Posted by mazdaverx713b
sounds like a poor connection(but make sure your bulbs are good). try pulling the assembly and checking the connections at the housing and the connector. i've never had this prolem, this is just where i would personally start.
If the above doesn't work it is most likely bad solder joints in the CPU. Do a search for Icemark. He rebuilds and sells rebuilt CPU's as well as other electrical parts.
Reply
Old Dec 19, 2006 | 07:20 PM
  #4  
jamless's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 69
Likes: 0
From: cinn ohio
cpu swap?

will a 89 cpu swap to an 88 gtu?
Reply
Old Dec 19, 2006 | 07:35 PM
  #5  
Dak's Avatar
Dak
Information Regurgitator
Tenured Member: 25 Years
Liked
Loved
Community Favorite
 
Joined: Feb 2001
Posts: 1,994
Likes: 208
From: Sparta TN. United States
I don't know about the CPU but I know the wiper switches won't. Mazdatrix shows the same part for the flashe CPU for all 86-92 cars so it may. I'm sure Icemark or some others on here can answear that one.
Reply
Old Dec 19, 2006 | 07:43 PM
  #6  
jamless's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 69
Likes: 0
From: cinn ohio
where?

can anyone tell me where the flasher unit - relay is located? thanks
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
Farkel
3rd Generation Specific (1993-2002)
4
Sep 16, 2015 06:16 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
m_haiser
2nd Generation Specific (1986-1992)
1
Sep 13, 2015 04:21 PM




All times are GMT -5. The time now is 01:54 AM.