2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

turbo2smoking

Thread Tools
 
Search this Thread
 
Old 06-06-04, 02:24 AM
  #1  
Senior Member

Thread Starter
 
a10secstreetcar's Avatar
 
Join Date: Jul 2003
Location: Florida
Posts: 301
Received 2 Likes on 2 Posts
turbo2smoking

hey,
i just bought a nice 2nd gen from a guy next to miami.real nice guy.anyways i was out last night race 03 cobra held with him pretty good.well a hour later went to race a mazda.i was driving down the road and a thick white smoke started coming out i look at the turbo and were the turbo meets the exhaust not mainfold by out the back there is oil i think i messed up the gasket.i have good oil pressure and everything is normal i was running 16 psi.do you guys know how much that will cost for a new gasket?thanks
Old 06-06-04, 10:25 AM
  #2  
Full Member

 
rxcollector's Avatar
 
Join Date: Nov 2003
Location: Ellensburg, washington
Posts: 221
Likes: 0
Received 0 Likes on 0 Posts
does it look like this

<----------------- ????

oh and I doubt its a turbo gasket. When I blew my turbo it was a thick BLUE smoke and smelled like oil. sounds like you have a coolant leak which my first motor had a broken center steel
Old 06-07-04, 11:05 AM
  #3  
Senior Member

Thread Starter
 
a10secstreetcar's Avatar
 
Join Date: Jul 2003
Location: Florida
Posts: 301
Received 2 Likes on 2 Posts
yea,the guy that i bought it from said thats what it sounds like a coolant leak how much will that cost?thanks
Old 06-07-04, 11:20 AM
  #4  
Gas Guzzlin' Tire Junkie

 
jetfire76's Avatar
 
Join Date: Aug 2002
Location: 19805
Posts: 459
Likes: 0
Received 0 Likes on 0 Posts
if i'm not mistaken, you are looking at an eventual engine rebuild...not cheap.
Old 06-07-04, 11:45 AM
  #5  
Rotary Enthusiast

 
apreludem's Avatar
 
Join Date: Oct 2002
Location: houston
Posts: 905
Likes: 0
Received 0 Likes on 0 Posts
1200 and up....or you can do it yourself for around 600? assuming that you don't have tools and stuff.
Old 06-07-04, 01:39 PM
  #6  
Senior Member

Thread Starter
 
a10secstreetcar's Avatar
 
Join Date: Jul 2003
Location: Florida
Posts: 301
Received 2 Likes on 2 Posts
well motor was just built 2,500 miles ago with u port.but i just took the intake off the turbo and the turbo is blown lots of shaft play and turbines all messed up so i guess i have to go buy a new turbo any good one.my motor will handle a bigger turbo i just need to buy some 750cc inj..thanks




All times are GMT -5. The time now is 03:40 AM.