Turbo power steering pump > NA rack
01-06-12, 12:59 AM
#1
Eats, Sleeps, Dreams Rotary
Thread Starter
Turbo power steering pump > NA rack
Can anyone tell me if a turbo/speed sensing PS pump can be made to work with an NA / RPM-sensing rack?
My power steering has always worked OK, but often during rapid steering changes it has a tendency to freeze, which is OK for normal driving, but baaaad for performance driving. I can't find any info on what's causing this, so I figure I would use a turbo pump off a JDM engine if I ever get around to doing a swap some day.
Should I just go and buy a remanned speed-sensing rack ($175 if you can find one) and use the pump, or will a turbo pump (three hose) work with an NA rack (two hose) with some work?
I wonder about the control unit though. Do you have to change the PS computer too?
My power steering has always worked OK, but often during rapid steering changes it has a tendency to freeze, which is OK for normal driving, but baaaad for performance driving. I can't find any info on what's causing this, so I figure I would use a turbo pump off a JDM engine if I ever get around to doing a swap some day.
Should I just go and buy a remanned speed-sensing rack ($175 if you can find one) and use the pump, or will a turbo pump (three hose) work with an NA rack (two hose) with some work?
I wonder about the control unit though. Do you have to change the PS computer too?
Thread
Thread Starter
Forum
Replies
Last Post
LunchboxCritter
2nd Generation Specific (1986-1992)
15
01-03-16 04:11 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM