Turbo flywheel in a N/A tranny??
04-19-08, 08:39 PM
#1
-----MYOLD7UPYOURS-------
Thread Starter
Join Date: Nov 2006
Location: wausau,wi
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Turbo flywheel in a N/A tranny??
Does anyone know if a turbo flywheel fits, and works with a n/a tranny if I use the clutch and pressure plate for the same fly?? I found this ACT unit on ebay for good price and the guy says it works, you just have to use the corrosponding clutch and pressure plate to mate with.. Heres the flywheel link.. ACT PROLITE FLYWHEEL 86-99 MAZDA RX7 FC3S FD3S 600140 (220176968412)
04-19-08, 09:02 PM
#3
Full Member
iTrader: (2)
Join Date: Jan 2004
Location: Bemidji, MN
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
check out this:
http://www.rotaryresurrection.com/2n...in_differ.html
a quote:
Nonturbo flywheels are smaller diameter than turbo flywheels. Rotary engines only use these 2 diameters for all applications, though the weights and styles changed a bit through the years.
The turbo flywheel is a good ¾” larger diameter than the nonturbo version. Because of this, clutch diameter, presureplate diameter, ringgear diameter, and starter placement were all changed.
http://www.rotaryresurrection.com/2n...in_differ.html
a quote:
Nonturbo flywheels are smaller diameter than turbo flywheels. Rotary engines only use these 2 diameters for all applications, though the weights and styles changed a bit through the years.
The turbo flywheel is a good ¾” larger diameter than the nonturbo version. Because of this, clutch diameter, presureplate diameter, ringgear diameter, and starter placement were all changed.
04-19-08, 09:16 PM
#4
-----MYOLD7UPYOURS-------
Thread Starter
Join Date: Nov 2006
Location: wausau,wi
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Wow thats a good write up and explaines my question perfect.. That guy on ebey is telling me that they work, like I said befor. I dont know to much about anything involving tranny's and drivetrain so I had no clue.. Ill send that guy that link posted above so he quites giving mis-information to everyone just to sell some parts.. Thanks for the help guys
04-19-08, 10:12 PM
#6
-----MYOLD7UPYOURS-------
Thread Starter
Join Date: Nov 2006
Location: wausau,wi
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
what a boner(the ebay dude), why cant everyone just get along and work on cars in happiness? I guess this means this thread is closed then,huh?
Thread
Thread Starter
Forum
Replies
Last Post