i wanted to varify with someone else if its possible to use a turbo 2 clutch with the n/a 13b.would i have to just use the turbo 2 flywheel or is it no possible.if thats the case i have a s4 turbo 2 but my n/a engine is a s5. i feel like the turbo 2 oem clutch and pressure plate would be a little stronger and cost effiecient for right now thats why i would like to use this setup if possible. any help would be appriciated
Thanks

 

No.
Clutch disc needs to be matched to the transmission, specifically the transmission input shaft.


-Ted

 

You can use a turbo clutch on an n/a motor if you use:

Turbo trans, Turbo Flywheel, Turbo clutch and pressure plate, turbo release bearing, turbo clutch slave cylinder.

Then you will also need either a turbo driveshaft and turbo rear end or a turbo trans to n/a rear end driveshaft from mazdatrix or a custom made one.

 

Got to add, starter is also different.

 

Yup yup forgot about that, you should also put in a wire extension to the starter so you don't cause a fire like mine did.