Trouble At Idle...help
#1
Newbie
Thread Starter
Join Date: Aug 2002
Location: chatown
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Trouble At Idle...help
car has trouble at idle, well not trouble, but the rpm needle fluxuates from 1500 rpms. then drops to 500 rpms, then hops right back up or something around those numbers, nothing above, sometimes it may even staul out.......what could it be, does this happen often, thanks......if this helps the car is the 88 aniversary rx7 turbo.
#3
Senior Member
Join Date: Apr 2002
Location: New Orleans
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
this sounds exactly like what happens when the boost sensor electrical plug is disconnected, but there are probably about 6 other things to be possibly checked.
good luck
TRU
good luck
TRU
#4
Newbie
Thread Starter
Join Date: Aug 2002
Location: chatown
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
thanks, ill check it out, but this might help even more, theres a greddy boost gauge and boost controller installed in the car, but they are not hooked up at the time, maybe that could be it, im not sure, any more help, i appreciate it
#5
Senior Member
Join Date: Apr 2002
Location: New Orleans
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
definitely sounds like a vacumm line or boost sensor problem to me, if it persists, i would look into blocking off the acv if you havent already done so. I know you have a 10AE but, you can always slap it back on.
hehe
TRU
hehe
TRU
Thread
Thread Starter
Forum
Replies
Last Post
FC3S Timmy
2nd Generation Specific (1986-1992)
16
10-03-15 01:08 AM
Red-Dragon_Akuma
New Member RX-7 Technical
11
09-28-15 06:09 AM