transmission
transmission
well guys...after spending so much money on my vert the transmission is starting 2 fail on me...the car still runs.. but when i put it in gear i can hear a small noise...like when u shake a broken light bulb and u hear that small noise...well thats the sound i am getting from my car. and i know it has 2 be the transmission because i had the engine rebuilt not 2 long ago and the driveshaft also re-done. last thing was the transmission, so any ideas what it could be from the inside? or know someone that can rebuild it? i got a price from a shop near my house and they said it they will rebuild it for $1350.00
(parts and labor) if any 1 knows any 1 that can do it for less plz pm me.
(parts and labor) if any 1 knows any 1 that can do it for less plz pm me.
Cheaper to buy a used tranny.
Standard transmissions I see go for anywhere from $50 to $300.
If it's an auto transmission, you can get them for free sometimes, people just give the suckers away.
Standard transmissions I see go for anywhere from $50 to $300.
If it's an auto transmission, you can get them for free sometimes, people just give the suckers away.
Transmisson
Dude I paid $50.00 for mine from a friend and had a transmission shop to install it for $125.00 it's been smooth shifting ever since. Check ebay if you can't find one locally there are always a few listed.
Trending Topics
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
$1350 to rebuild a transmission?! That's a bit nuts. You should find a different shop.
I had mine rebuild several years ago at a reputable local shop that has been in business for 50 years. They replaced the input shaft, all bearings, 2nd gear syncro, cluster shaft and a few other odds and ends. The cost was $600 Canadian. I think you're being ripped off.
I had mine rebuild several years ago at a reputable local shop that has been in business for 50 years. They replaced the input shaft, all bearings, 2nd gear syncro, cluster shaft and a few other odds and ends. The cost was $600 Canadian. I think you're being ripped off.
$1350 to rebuild a transmission?! That's a bit nuts. You should find a different shop.
I had mine rebuild several years ago at a reputable local shop that has been in business for 50 years. They replaced the input shaft, all bearings, 2nd gear syncro, cluster shaft and a few other odds and ends. The cost was $600 Canadian. I think you're being ripped off.
I had mine rebuild several years ago at a reputable local shop that has been in business for 50 years. They replaced the input shaft, all bearings, 2nd gear syncro, cluster shaft and a few other odds and ends. The cost was $600 Canadian. I think you're being ripped off.

no short shifter. its the regular one. and i dont have any problems shifting into gear. and yea when he said 1350.00 i was like WAH!!!!!! but i got a used transmission off of ebay. like 300bucks with the shipping. and it has a 30 day warranty. so lets see what happens when i get that transmission in.
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
See if you can get someone that Knows the difference between a Pilot nearing going Bad and a Throw out Bearing Going Bad.If the car is shifting Ok,But it has a Grrr when you Put it in gear,then it could "just Be " a bearing..that is If your Clutch is good..I would Honestly get a Second Opinion before Yanking a transmission that may be good.
well i got the other transmission comming in already. so i will be having 2 transmissions at my pad now. so i will be able 2 play around with now. so now i have a back up for the back up.
its not really a grrr noise. like i said it sounds like when u shake a light bulb that is bad. that lil zizzzz zizzzz noise.
its not really a grrr noise. like i said it sounds like when u shake a light bulb that is bad. that lil zizzzz zizzzz noise.
Last edited by epic; Nov 7, 2008 at 10:17 PM. Reason: add'd more info
Thread
Thread Starter
Forum
Replies
Last Post
MILOS7
3rd Generation Specific (1993-2002)
2
Oct 9, 2015 02:19 AM






