Transmision Bolts Being A Bitch!!
#1
Junior Member
Thread Starter
Join Date: Aug 2007
Location: SPRING, TX
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Transmision Bolts Being A Bitch!!
I'M DOING A TRANSMISION REPLACEMENT AND I NEED ADVISE ON TAKING THE TOP BOLTS OFF SINCE I HAVE NO LEVERAGE TO WORK WITH.
THANKS
THANKS
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Put a socket on it and use wrench. *shrug*
They can be a bit of a pain sometimes so you may have to use a cheater pipe on the ratchet as your movement is restricted. A long box end wrench can help. Remove the intercooler if you need more access.
They can be a bit of a pain sometimes so you may have to use a cheater pipe on the ratchet as your movement is restricted. A long box end wrench can help. Remove the intercooler if you need more access.
#3
rotorhead
iTrader: (3)
If you can't get a ratchet and a socket in there with a decent range of motion, use the box end of a wrench, then cut off the open end and put a cheater bar over that. Also, buy a swivel socket (works better than a universal joint) at Sears for like $15 or something. Makes removing those bolts easier.
Thread
Thread Starter
Forum
Replies
Last Post