trans problems

Reply Subscribe

Thread Tools

Search this Thread

11-06-10, 05:59 PM

fc323

Senior Member

Thread Starter

Join Date: Jan 2010

Location: los angeles

Posts: 324

Likes: 0

Received 1 Like on 1 Post

trans problems

ok i bled the cltuch system and it still goes all of the way down and i can move the fork around(if thats relvant) and i have replaced the master and slave

Reply Like

11-06-10, 06:34 PM

farberio

NASA-MW ST4

iTrader: (7)

Join Date: Dec 2004

Location: Norcal, Bay Area

Posts: 3,800

Likes: 0

Received 3 Likes on 3 Posts

The fork should not be able to be moved by hand when the trans is installed. You will have to pul the trans and see what happened.

Reply Like

11-06-10, 07:30 PM

fc323

Senior Member

Thread Starter

Join Date: Jan 2010

Location: los angeles

Posts: 324

Likes: 0

Received 1 Like on 1 Post

so what could the problem be?

Reply Like

11-06-10, 10:08 PM

Black Knight RX7 FC3S

Turbo power, activate!

iTrader: (7)

Join Date: Nov 2002

Location: Philadelphia

Posts: 1,708

Likes: 16

Received 5 Likes on 5 Posts

the fork moving around?
or is it just moving back and forth?
Get another person to look at the slave cylinder when you step down on the clutch and see if it pushes against the fork.

Reply Like

11-06-10, 11:40 PM

fc323

Senior Member

Thread Starter

Join Date: Jan 2010

Location: los angeles

Posts: 324

Likes: 0

Received 1 Like on 1 Post

well it moves back and forth and side to die too
and i can push the slave back in like when its brand new and ur just compresing the spring to install

Reply Like

11-06-10, 11:49 PM

farberio

NASA-MW ST4

iTrader: (7)

Join Date: Dec 2004

Location: Norcal, Bay Area

Posts: 3,800

Likes: 0

Received 3 Likes on 3 Posts

The fork may have popped off its mount. That would cause it to be all wiggly.

Reply Like

11-07-10, 01:02 AM

Black Knight RX7 FC3S

Turbo power, activate!

iTrader: (7)

Join Date: Nov 2002

Location: Philadelphia

Posts: 1,708

Likes: 16

Received 5 Likes on 5 Posts

is there tension on the slave cylinder when you push the shaft inside the slave.
If the fork did come off, you can usually pop it back into the ball joint without taking the trans off.

Reply Like