Found a "kind of" maste bolt list, but it didn't have thread pitch for the bolts. If anyone out there happens to know the complete length, size, diameter, and thread pitch for s5 transmission to engine bolts, please let me know. No, not ordering from mazdatricks

 

i went to a couple different hardware stores to try to find these, and then to a place that only sells nuts and bolts, and the guy there told me to order them from what ever manufacturer they came from (aka mazda)

I have an s4, and can't remember the sizes anyway. I paid slightly above $15CAD for three of the correct bolts, and another bolt that was suppose to be the fourth which was not. I can't remember what mazdatrix had charged, but either way, your most likely limited to them or mazda.

You might have some better luck down south, or by spending a bit of time going everywhere, but at the end of the day, your easiest alternative will be mazda or mazdatrix.

 

The factor here is time.... The more tiny stupid little snags that come up, the less I want to even look at the car. So I just want the fuc%er on the road at this point. A friend of mine found the exact length, thread pitch and so on, and how many of each, So I am going to go to Home Depot Racing tomorrow morning before work, and my fall back locations are OSH and several hardware stores specializing in bolts and various fasteners. Also have a Lowe's I could check out. Someone has to have them... I went to three THREE damn pick n pulls today... NOTHING. ...srsly, wtf. It's a damn bolt........ /endrant.

 

If u know the size/thread pitch and everything, give fastenal a call. There's one here in modesto on Finch road across from the old tri-valley cannery. Not too far from picknpull actually. I know thats where my work orders all their nuts and bolts. Plus you probably want abetter grade of bolt than home depots brittle *** bolts.

 

the size is 10mm. they are fine thread. here in sd the only place to get em is fastenal. i do not know the lengh. at least tht is wat they were for my s4