Tranny Bolt Help
#1
Junior Member
Thread Starter
Join Date: Oct 2010
Location: Lorain Oh
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Tranny Bolt Help
IM replacing the clutch on a 88 GXL and Im having trouble getting the bell housing bolts. The top nut, bolt behind oil filter and the upper passenger side are the ones im having issues with. The ones i can get to i need a bigger ratchet to break loose, but i dont have enough room to use it, and the upper nut i cant seem to get from under the hood because of a eyelet to pull the motor. any advice?
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
you can get at the one by the oil filter if you reach up from under the car.
the one with the eyelet is a *****.I got a 14mm wrench with a pipe on it and undid it from the passenger side up top.I scraped the **** out of my hands doin it.
the one with the eyelet is a *****.I got a 14mm wrench with a pipe on it and undid it from the passenger side up top.I scraped the **** out of my hands doin it.
Thread
Thread Starter
Forum
Replies
Last Post
ricardo.benin
3rd Generation Specific (1993-2002)
3
09-23-15 10:08 AM