2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Tow truck towed 1991 FC from subframe(?) hook

Thread Tools
 
Search this Thread
 
Old May 13, 2013 | 01:31 AM
  #1  
cloudz's Avatar
Thread Starter
Senior Member
iTrader: (1)
 
Joined: Oct 2010
Posts: 277
Likes: 0
From: San Jose
CA Tow truck towed 1991 FC from subframe(?) hook

Hey guys so my friend had his 1991 Fc towed.

The steering wheel was locked and it was parked so he drove the car forward and the tow truck guy used his hook and hooked it under the front of the car into a hole which I assume was located on the subframe.

He proceeded to pull the car from the side with the eBrake ON so that the car would turn and so he could pull it up the flatbed.

Would anything have been damaged? Seems like the hook was there so you could pull the car with it... But it should have been pulled forward, not sideways to change the direction of the car.
Reply
Old May 13, 2013 | 11:15 AM
  #2  
RotaryResurrection's Avatar
Lives on the Forum
Tenured Member: 20 Years
Liked
iTrader: (8)
 
Joined: Oct 2003
Posts: 11,576
Likes: 27
From: Morristown, TN (east of Knoxville)
The hooks are meant to be loaded in a front-back direction, and not a side-side direction. The brackets can be bent or the bolts can be sheared off with enough lateral force. Fortunately these are lightweight cars so it's unlikely any damage was done. You'd know it if the tow hook bolts broke off, so since that didn't happen, as long as the hook isn't significantly bent, it is fine.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dona1326cosprings7
1st Generation Specific (1979-1985)
4
Oct 29, 2015 06:47 AM
Aramir
New Member RX-7 Technical
24
Oct 18, 2015 02:39 AM
MidnightOwl
2nd Generation Specific (1986-1992)
1
Sep 25, 2015 10:24 PM




All times are GMT -5. The time now is 07:53 AM.