2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Topspeed Pro-1 Exhaust

Thread Tools
 
Search this Thread
 
Old Oct 26, 2010 | 11:06 AM
  #1  
HoustonMS3's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2009
Posts: 288
Likes: 0
From: Houston, Texas
Topspeed Pro-1 Exhaust

Has anyone bought this exhaust? It seems to be popular with a few of the Nissan guys.

This is a tempting alternative to RB exhaust for me, but I can't find a single review or picture of it installed on an FC on the web.

http://cgi.ebay.com/ebaymotors/3-MAZ...item43a2923f78
Reply
Old Oct 26, 2010 | 11:57 AM
  #2  
Silverfc88's Avatar
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2002
Posts: 1,790
Likes: 3
From: Travis AFB, CA to Okinawa, Japan
There are a few guys running that exhaust on here. I'm running the older version with the smaller tips attached to a Corksport 80mm midpipe and modified Corksport downpipe.

Search around there might be the same exhaust listed for a bit cheaper.
Reply
Old Oct 26, 2010 | 12:11 PM
  #3  
HoustonMS3's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2009
Posts: 288
Likes: 0
From: Houston, Texas
I was hoping to get a picture of it installed. Those tips are a little big for my tastes and I want to make sure it does not look like some $50 muffler job done to a Civic.

I am going to assume that is a very loud system.

Sick car btw...
Reply
Old Oct 26, 2010 | 12:30 PM
  #4  
Silverfc88's Avatar
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2002
Posts: 1,790
Likes: 3
From: Travis AFB, CA to Okinawa, Japan
https://www.rx7club.com/showthread.p...t=Motoria+dual

Search Motoria or SSautochrome.
Reply
Old Oct 26, 2010 | 04:35 PM
  #5  
HoustonMS3's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2009
Posts: 288
Likes: 0
From: Houston, Texas
The topspeed is not the same exhaust, but very similar. That is pretty ugly for the price so I guess I'm leaning back to the racing beat.
Reply
Old Oct 26, 2010 | 04:38 PM
  #6  
jjcobm's Avatar
Are you experienced?
Tenured Member 10 Years
iTrader: (18)
 
Joined: Oct 2008
Posts: 2,099
Likes: 2
From: Illinois
It will be louder than a racing beat if that is your concern.
Reply
Old Oct 26, 2010 | 05:14 PM
  #7  
Silverfc88's Avatar
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2002
Posts: 1,790
Likes: 3
From: Travis AFB, CA to Okinawa, Japan
^ Definetly be louder than the Racing Beat system


Whatever the name is, it still comes from the same place with a slight change to the muffler and they call it there own. The price is higher than what I remember. It was more along the price of what the single cost now from that seller.

If I had the money back in the day I would have gone Racing Beat as well. Straight swap and bolts up fairly easily. A very nice exhaust system that isn't to loud.

Now though I'm thinking more along the lines of a custom dual 3".
Reply
Old Oct 26, 2010 | 05:35 PM
  #8  
Nick_d_TII's Avatar
Rotary Freak
Tenured Member 20 Years
iTrader: (6)
 
Joined: May 2002
Posts: 1,620
Likes: 6
From: Beaverton, OR
I used to have a SSautochrome Motoria 3" single exhaust. Cheap, 3" through and through, but the resonator started cracking around the edges(not the welds) and it was damn loud (96db at WOT measured at the track) cops mentioned it everytime I got pulled over. I even got an unmuffled engine warning once...

Now I have a RB and I love it. Quiet, sturdy and shiny, but still 3" to (2) 2.5 duals and bolted right up. Cops don't even notice me.
Reply
Old Oct 27, 2010 | 11:07 AM
  #9  
HoustonMS3's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2009
Posts: 288
Likes: 0
From: Houston, Texas
I guess there is no decent (just my opinion) option to the RB. I was hoping to save the $400 difference between the two but I guess the N1 style and volume is not for me.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ian_D
New Member RX-7 Technical
6
Sep 6, 2015 10:38 PM
doritoloco
New Member RX-7 Technical
7
Sep 5, 2015 12:41 PM
FührerTüner
General Rotary Tech Support
3
Sep 4, 2015 01:41 PM




All times are GMT -5. The time now is 10:24 AM.