2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

top speed Q...

Thread Tools
 
Search this Thread
 
Old May 26, 2006 | 08:56 AM
  #1  
Unseen24-7's Avatar
Thread Starter
Card-carrying Rotorhead
Tenured Member 15 Years
 
Joined: May 2006
Posts: 457
Likes: 0
From: Quebec
top speed Q...

I have a bone stock '87 GXL and I can't seem to get it past 170 KM/h (106 mph). I heard they could do like 130 mph, whats up?
Reply
Old May 26, 2006 | 09:02 AM
  #2  
Goofy's Avatar
Rotary Enthusiast
Tenured Member 15 Years
 
Joined: Feb 2006
Posts: 886
Likes: 0
From: USA
Well, other than just having a poorly tuned car, it's possible you have a JDM speedometer, which includes a 180 km/h speed limiter.
Reply
Old May 26, 2006 | 09:03 AM
  #3  
1987_Gxl's Avatar
ALLyourRX7areBELONGtoUS
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 357
Likes: 0
From: Shoreline,WA
your car is probbally old and tired.. my old 87 gxl was able to hit 120 though
Reply
Old May 26, 2006 | 09:06 AM
  #4  
SureShot's Avatar
Seduced by the DARK SIDE
Tenured Member 15 Years
 
Joined: Apr 2001
Posts: 7,323
Likes: 2
From: Orange Park FL (near Jax)
Maybe start by checking the aux port actuators.
Reply
Old May 26, 2006 | 09:10 AM
  #5  
Unseen24-7's Avatar
Thread Starter
Card-carrying Rotorhead
Tenured Member 15 Years
 
Joined: May 2006
Posts: 457
Likes: 0
From: Quebec
where/what are those?
Reply
Old May 26, 2006 | 09:13 AM
  #6  
RRTEC's Avatar
Rotartist
Tenured Member 10 Years
iTrader: (13)
 
Joined: Sep 2003
Posts: 7,252
Likes: 2
From: Spring Hill TN 37174
Search under 6port actuators
Reply
Old May 26, 2006 | 12:16 PM
  #7  
1990Rx7Gtu's Avatar
Rx7 Gtu
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 43
Likes: 0
From: Wisconsin
Hmmm. My buddys 1990 gtu can hit like 127 that ive seen. But someone else has gotten his up to 136 in the country. We havnt topped out yet...
Reply
Old May 26, 2006 | 02:29 PM
  #8  
synesthete's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Aug 2005
Posts: 303
Likes: 0
From: Portland. OR
Generally your top speed is redline in 4th gear. 5th wont move after that.
So you should be closer to 130. If the aux ports on the uim are stuck closed than you would not reach that speed. Also i assume that you are in fact redlining it, if your shifting to 5th before the redline you wont get top speed.
Reply
Old May 26, 2006 | 02:41 PM
  #9  
Boostmaniac's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Mar 2006
Posts: 675
Likes: 0
From: Louisville, Ky
I pounded out 140 the other day....

:P

sorry, just had to.
Reply
Old May 26, 2006 | 02:45 PM
  #10  
RRTEC's Avatar
Rotartist
Tenured Member 10 Years
iTrader: (13)
 
Joined: Sep 2003
Posts: 7,252
Likes: 2
From: Spring Hill TN 37174
Here we go again, lets all agree that our cars do 210mph downhill with the wind behind us and not and start another my car does __________ mph thread again...
Reply
Old May 26, 2006 | 02:59 PM
  #11  
evelhalo's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Apr 2006
Posts: 171
Likes: 0
From: Colorado
ya that was a realy long thread,
the 6 port actuators are located on the left side(facing the car) of your engine, almost all the way down, located on the lower intake manifold ish. there are two of them and they are about 2 in in diameter. if you search theres alot of ways to test them, but you should be able o push the valve open with a bit of pressure
Reply
Old May 26, 2006 | 04:19 PM
  #12  
Boostmaniac's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Mar 2006
Posts: 675
Likes: 0
From: Louisville, Ky
Originally Posted by RRTEC
Here we go again, lets all agree that our cars do 210mph downhill with the wind behind us and not and start another my car does __________ mph thread again...

<---- Turbo II, I had an unfair advantage. You should have read my sig.

Last edited by Boostmaniac; May 26, 2006 at 04:23 PM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Donald Hampton
2nd Generation Specific (1986-1992)
16
Nov 23, 2022 06:38 PM
MazdaspeedR1
The Bad & Fugly Businesses
27
May 22, 2018 05:58 PM
ZaqAtaq
New Member RX-7 Technical
2
Sep 5, 2015 08:57 PM




All times are GMT -5. The time now is 03:16 AM.