Already searched and nothing was what I needed. So can anybody explain the process of what to do to the switch? I just want to clean it for a temp fix. Does anybody know of any pictures or anything that might help me out? Any help would be great.

kleach

 

If yours dont have rear wiper, i will sell you a rebuild one for 30

 

ok well I talk to you about that later when I have 30 $ to spend but do you know what to do on it right at this moment? I don't have rear wipers and it only works in the lowest setting. Please help

kleach

 

Nope, because I drove around for a week without my parking lights because my light switch **** to bed. Just bought replacmeent today. Sorry

 

i'd rather have mine work in just low then stay on all the time like mines. mins is always on never turns off so i have to pull the fuse out to turn it off and on.

 

Found a link http://fc3s-pro.com/TECH/HOWTO/WIPER/wiper.html

 

HI,LOOK AT WWW.FC3S.ORG/WIPER.HTML

 

take it apart

Cut the top to expose relay number 3:


Unsolder these points.


replace the relay with a new one (I recommend the Z950-ND relay from Digikey- www.Digikey.com)

Solder new relay in.

reassemble the wiper switch and put it back into the car.

If your rear wiper is not working as well, also replace relay # 1.

 

hey would the wiper staying on all the time be the relay as well?????