I should be installing a tII rear end on my fc. Besides the actual rear end, half shafts and bushings, is there any other pieces I will need for the swap? I have a S4 na with lsd rear right now.

 

I dont believe that will bolt to your driveshaft.

 

a custom drive shaft will be needed.

 

That's right. Or are you doing the whole drivetrain swap form the T2?

 

yes, i know. I have engine tranny already, and the drivshaft is on the way.

I'm sorry, I guess I should of explained. I am doing a tII swap. I need to know if I need any other components to mount the rear end.

 

If you have the drive line in order then it hsould bolt right on unless you had an auto N/a which case you need to weld tranny mounts

 

Nope, sounds like your set. Although you might need one more thing. A whole lot of freakin time. Good luck!

 

you'll need a driveshaft. you'll have to get it custom made because not alot of people go from a n/a tranny to a t2 driveshaft. my recommendation is to bite the bullet and spend the extra money on a t2 tranny and get a used t2 driveshaft. in the end you'll like to know your tranny won't fail on you because its a weak *** n/a

er.... i guess just ignore that post.

 

make sure you replace that front diff mount why you are in there