Can one of you friendly TII owners do me a favour?

I need these measurements, if you may:



Green - Offset distance from exact centre?
Yellow - When the scoop hole 'starts' (in orientation to the front preferably)?
Magenta - How tall is the scoop hole?
Blue - (Calculating clearance) How far from beginning of scoop hole until it is flush again with the hood?

Thanks in advance. I'm trying to find out if I can implement something on a project.

 

I'll go measure now. Give me a few minutes. Did you want cm or inches?

 

As long as it's a measurement.. Thanks..

 

Ok here are the measurements:

I took 4 measurements for the green lines since the hood scoop curve narrows as you go up.

the end of the hood scoop is in allignment with the windshield wiper nozzles for reference. The nozzles are 10 cm from the top of the hood.

GREEN
beginning of hoodscoop on left side (facing car)= 53 cm
end of hoodscoop on left side= 55 cm

beginning of hoodscoop on right side = 39 cm
end of hoodscoop on right side = 41 cm

YELLOW
from front of hood to the overhang where the scoop begins = 67 cm

MAGENTA
4 cm

BLUE
from top of hood to the beginning of the overhang = 58 cm

EXTRA MEASUREMENTS:
from the overhang of the hood scoop to the actual beginning of the hood scoop= 8 cm

 

To prove to someone it's off center?


-Ted

 

Thank you, ilike2eatricers. That's what I needed.

RETed, no, I'm trying to stuff something in there, but I don't have a hood handy for testing. Should I find (with the measurements) that it can't be done with a TII hood, then I'll be taking another route.

Thanks guys.

 

oh yeah Its deffinatley off center. I have racing stripes on my car and the stripes go over one side way more than the other. Looks pretty cool.

 

No kidding. Just wanted to know by how much..

 

its off center?!? oh god! i'm blind in one eye! there goes my depth perception.