azfc3s

does anyone know where I could buy the stock engine harness pins and/or connectors? I'm trying to rebuild the stock engine harness.

Thanks

87 t-66

iTrader: (133)

which connectors do you need?

azfc3s

I'm not sure yet, I just wanted to know if there is any where I could get the connectors and the pins that go in to the connectors so I know where to look when I get to that point because the harness I have isn't in the best condition.

AUGieDogie

iTrader: (4)

Not a real easy one to find. They make these things hard for us so we cant do the work ourselves. $900 for a new wireharness sound familiar?

Your best bet is to get the cheapest harness you can find, then pull the pins out, cut the wire, solder and shrink wrap another length of wire in, etc. Thats how I did some of my ECU wires that where hacked all the hell.

RETed

No.

BTW, bumps are not allowed in this section.
What makes you so special?


-Ted

AUGieDogie

iTrader: (4)

So I decided to revive this thread.

I've been doing some rewireing and can't help but think how nice it would be to just redo most of the wires.
The plugs say amp on them, which is a division of tyco.
http://www.tycoelectronics.com/default.asp

They have craploads of conectors, so I have to beleive they have the damn pins. I'm going to look but this could take a while

arghx

iTrader: (3)

Banzai Racing may or may not be willing to resell them to you.

theory

iTrader: (5)

I've tried and they won't sell them.

theory

iTrader: (5)

I've searched and searched and have been un-able to find any sources for the pins/connectors. Someone out there has had to have better luck over the years?

Turblown

iTrader: (12)

If you only need a few random ones I have several Rx-7 harnesses that have been chopped up etc...

theory

iTrader: (5)

I'm only in need of the ecu connector pins. (on the harness side (female)). Still trying to find them.