2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

tII Dash harness plz help identify these areas.

Thread Tools
 
Search this Thread
 
Old Oct 19, 2009 | 10:55 PM
  #1  
meximan's Avatar
Thread Starter
Rotary Freak
Tenured Member 10 Years
iTrader: (37)
 
Joined: Apr 2006
Posts: 2,371
Likes: 0
From: Rancho Cucamonga
tII Dash harness plz help identify these areas.

Started tearing apart my project TII. The guy i bought it from was running 5 different aftermarket guages + his own computer management (dunno which) There was ALOT of new installed wires under teh dash when i pulled it out that were not connected to the dash harness. However There are 2 areas where teh dash harness has been hacked up, Now im trying to figure out what they went to, and if they are needed. Heres some pics.

This is to the right of the steering column. and a few pics zoomed in





This are was down by the fuse box on driver side, had this strange clip looked like it spliced into another green wire.



Sorry about the shitty camera but its all i got to work with
Reply
Old Oct 20, 2009 | 05:49 PM
  #2  
meximan's Avatar
Thread Starter
Rotary Freak
Tenured Member 10 Years
iTrader: (37)
 
Joined: Apr 2006
Posts: 2,371
Likes: 0
From: Rancho Cucamonga
ttt
Reply
Old Oct 21, 2009 | 01:04 AM
  #3  
R.E.wing_FC3s's Avatar
*reallly knowing the fc
Tenured Member 10 Years
 
Joined: May 2007
Posts: 160
Likes: 0
From: victory lane
i live in oly, drive a black fc. my names josh it'd be cool to check out your project, might be able to advise on the wiring. the green wire is for the speed sensor input on an aftermarket computer/guage. it has been attached to the green/red speed sensor wire from the speedometer to the cruise control/abs/aas. my phone #5033071014
Reply
Old Oct 24, 2009 | 02:03 PM
  #4  
meximan's Avatar
Thread Starter
Rotary Freak
Tenured Member 10 Years
iTrader: (37)
 
Joined: Apr 2006
Posts: 2,371
Likes: 0
From: Rancho Cucamonga
thanks josh i actually live in cali now but i totally would have been down. Here is more info on the wires.

alright so The left plug next to the floor, The color of the wire that was spliced IS green and red stripe.

The color of the "6 prong plug" near the steering column, the colors spliced are, Blue and red stripe and Black and white stripe.There are two black and white stripe wires on this plug this one is the middle one. Hoping that these arent important because he left no room re attach them.

The "four prong plug" next to the six prong only has two wires running to it and the metal connectors inside the plug are gone and no wires that seem to lead to it. I dont know if its supposed to be that way but looks to be.

Thanks for the help guys i sat and stared at wiring diagrams for hours tryin to figure this out, BUt electrical **** is not what im good at. I need "wiring for dummies" . Anyways thanks alot!
meximan is online now Report Post Edit/Delete Message
Reply
Old Oct 30, 2009 | 10:59 AM
  #5  
meximan's Avatar
Thread Starter
Rotary Freak
Tenured Member 10 Years
iTrader: (37)
 
Joined: Apr 2006
Posts: 2,371
Likes: 0
From: Rancho Cucamonga
ttt
Reply
Old Oct 30, 2009 | 11:10 AM
  #6  
arghx's Avatar
rotorhead
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Aug 2004
Posts: 16,205
Likes: 461
From: cold
that's mayhem right there
Reply
Old Oct 30, 2009 | 12:17 PM
  #7  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
Sounds to me like the Circuit Opening Relay is missing. It installs in the plug with two B/W wires in it. Photos are too hard to look at.
Reply




All times are GMT -5. The time now is 06:52 AM.