TID questions
06-02-04, 10:13 AM
#1
Rotary Enthusiast
Thread Starter
Join Date: Feb 2002
Location: VA
Posts: 938
Likes: 0
Received 0 Likes
on
0 Posts
TID questions
I'm making a TID today out of 2.5" piping. I know I need one silicone coupler from 2.5" to 2" to go onto the turbo. How about adapting it to the S4 AFM? Will I need an adapter plate for both ends of it or just one? When I make the adapter, what size should the adapters be (ie the diameter of the pipe coming off the adapter plate)?
-Joe
-Joe
06-02-04, 10:15 AM
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
The outlet of the AFM is round. It's close enough to 3" that you can use a 3" coupler.
If you are making an adapter for the other end, it should match your filter (about 3").
If you are making an adapter for the other end, it should match your filter (about 3").
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM