tid pipe question
11-24-05, 03:29 AM
#1
aim** JI II IM IM Y
Thread Starter
Join Date: May 2005
Location: 90703 cerritos california
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
tid pipe question
Would a 3 inch id aluminum pipe with an 8 inch leg/ 4 inch radius work as piping for the tid mod (meaning the pipe can be used as it is without cutting)? It's the pipe from road race engineering under aluminum pipes http://www.roadraceengineering.com/mandrelbends.htm
I will also be using an hks megaflow intake so size and fitment of all the parts will be an issue due to the size and shape of the filter.
I will also be using an hks megaflow intake so size and fitment of all the parts will be an issue due to the size and shape of the filter.
11-24-05, 03:44 AM
#3
BRAAAAAP pssh BRAAAAAP
iTrader: (11)
Join Date: Mar 2004
Location: cali
Posts: 1,461
Likes: 0
Received 0 Likes
on
0 Posts
i used a 3" pipe but it was a 45 degree bend and it only had 2-3 inches on each side of the bend it bolts straight up to the maf and to my bnr stg 4 and also an hks filter
