2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

thump in transmission when changing gears

Thread Tools
 
Search this Thread
 
Old 07-28-02, 11:37 PM
  #1  
Full Member

Thread Starter
 
swrx7's Avatar
 
Join Date: Jul 2002
Location: jacksonville/florida
Posts: 88
Likes: 0
Received 1 Like on 1 Post
thump in transmission when changing gears

here is my problem....

when i shift gears i get a large thump form somewhere in the rear of the car. i have had this problem once before and it was the u-joints...but not this time. i cant pinpoint the problem but it is very annoying and feels like the transmission is gonna fall out. i have checked the driveshaft and it appears to be fine. i have also checked for any play in the rear end but cant find anything. anyone got any suggestions???
(this is an 88 se 210,000 miles)
Old 07-28-02, 11:45 PM
  #2  
Edmond Dantes

iTrader: (1)
 
Spraintz's Avatar
 
Join Date: Jun 2002
Location: Dallas, Texas
Posts: 1,930
Likes: 0
Received 0 Likes on 0 Posts
Very similar problem that happend to me in a 1987 Base. There is mount that keeps the diff. housing connected to the rear subframe, it may have broken.

Hope that helps
Old 07-28-02, 11:46 PM
  #3  
I wish I had a posse...

 
ZachSpazz's Avatar
 
Join Date: Feb 2001
Location: Cincinnati, Ohio-Boycott Central
Posts: 896
Likes: 0
Received 0 Likes on 0 Posts
It's most likely your front differential bushing. These things are almost always goofed up on our cars and I imagine your car is no exception.
Old 07-28-02, 11:49 PM
  #4  
Full Member

Thread Starter
 
swrx7's Avatar
 
Join Date: Jul 2002
Location: jacksonville/florida
Posts: 88
Likes: 0
Received 1 Like on 1 Post
thanx for the info..will check in the morning
Old 07-29-02, 08:11 AM
  #5  
Shelby Tuner & FC badass

 
GLHS's Avatar
 
Join Date: Apr 2002
Location: Seminole, Florida
Posts: 1,101
Likes: 0
Received 0 Likes on 0 Posts
you have a broken diff mount.

you need to have it welded back on.
Old 07-29-02, 08:53 AM
  #6  
HAILERS

 
HAILERS's Avatar
 
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes on 19 Posts
This jpg: https://www.rx7club.com/forum/attach...&postid=880442
Old 07-29-02, 09:05 AM
  #7  
von
Rotary Freak

 
von's Avatar
 
Join Date: Dec 2001
Location: sandiego, ca
Posts: 2,941
Likes: 0
Received 1 Like on 1 Post
same here. ITs the diff mounts. Probly the front. You can change it yourself.
Old 07-29-02, 01:22 PM
  #8  
brap brap

 
Join Date: May 2002
Location: Migrated back to Gulf Breeze, FL
Posts: 121
Likes: 0
Received 0 Likes on 0 Posts
I have the same problem, but I'm missing some diff. mounts....
Old 07-29-02, 01:34 PM
  #9  
Senior Member

 
akageals's Avatar
 
Join Date: Feb 2001
Location: Roanoke
Posts: 501
Likes: 0
Received 0 Likes on 0 Posts
Just replaced the front diff. mount on my car. push up and down on the "nose" (where the drive shaft bolts up) of the diff. . If it moves, the mount is broken.

Todd
Old 07-31-02, 12:28 AM
  #10  
Full Member

 
Join Date: Apr 2002
Location: Oregon
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
I can do one better, here is a pic of what I had to deal with this last weekend. This is what happens when the diff mount doesnt get tightened, and also additional pony's will cause this. I had to manufacture an 1/8 inch slotted plate to weld in so the nuts would bear all around. Sorry no pics of the plate but here is a pic of the tab that broke off. It wasnt to bad of a job getting the sub frame out, dont be discouraged.....
Old 07-31-02, 01:14 AM
  #11  
Full Member

Thread Starter
 
swrx7's Avatar
 
Join Date: Jul 2002
Location: jacksonville/florida
Posts: 88
Likes: 0
Received 1 Like on 1 Post
much thanx every1 for the info and pics ......havent had a chance to check yet but will have access to a lift this weekend. where is the best place to buy a new diff. mount? i ve been looking through mazdatrix but the seem a lil expensive aon some things.
Old 07-31-02, 12:00 PM
  #12  
Full Member

 
Join Date: Apr 2002
Location: Oregon
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
check your pm swrx7
Old 07-31-02, 12:05 PM
  #13  
Slow and old

 
UniqueTII's Avatar
 
Join Date: May 2001
Location: It's a midwest thing.
Posts: 1,158
Likes: 0
Received 0 Likes on 0 Posts
The stock ones suck, so if you're going to buy one, try and get a stronger one.
Old 08-01-02, 02:47 AM
  #14  
Full Member

Thread Starter
 
swrx7's Avatar
 
Join Date: Jul 2002
Location: jacksonville/florida
Posts: 88
Likes: 0
Received 1 Like on 1 Post
thanx whislr
Old 08-01-02, 02:53 AM
  #15  
SOLD THE RX-7!

 
Scott 89t2's Avatar
 
Join Date: Mar 2001
Location: Vancouver, BC, Canada
Posts: 7,451
Likes: 0
Received 0 Likes on 0 Posts
www.mazdamotorsports.com sells theirs for $63. stronger then stock. it's not listed just call and tell them you want the front diff mount for your year/model (all 2nd gens the same).
Old 05-18-03, 10:41 PM
  #16  
Full Member
 
Pyrocloud's Avatar
 
Join Date: May 2003
Location: .
Posts: 106
Likes: 0
Received 0 Likes on 0 Posts
bump
Old 05-19-03, 08:27 AM
  #17  
Seduced by the DARK SIDE

 
SureShot's Avatar
 
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes on 2 Posts
With a clunk thunk here,
And a tink clink there,
Old McDonald had a 7,
E I E I O..
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
firzen
2nd Generation Specific (1986-1992)
9
09-15-15 12:04 PM
Enzo1944
New Member RX-7 Technical
2
09-06-15 08:57 AM



Quick Reply: thump in transmission when changing gears



All times are GMT -5. The time now is 07:47 PM.