Throttle body differences.
#2
Rotary Enthusiast
iTrader: (9)
the aluminum housing, may be the same, but the whole assembly is different. On an N/A TB, the throttle cable connects to the near side (towards the firewall) and rotates the pullys counter clockwise. whereas the turbo throttle cable connects to the farside of the TB and rotates the pullies clockwise. you might be able to switch out the pullys and rods they mount on, but i'm not sure all the return springs will mount properly then.
however, since you only need the TPS, those are the same. and easy to switch out.
however, since you only need the TPS, those are the same. and easy to switch out.
#3
The Brap is Back
iTrader: (3)
wrong. A tps for the S5 NA and T2 are not the same. I had a chanve to examine both such units and they are different as far as positioning is concerned. However I am unsure if they are the same electronically, but mechanically they are made different. As in they are in different positions.
#5
The Brap is Back
iTrader: (3)
Originally Posted by need-a-t2
are you sure about that? i was fairly sure they were the same. do have both you could get some pics of?
Thread
Thread Starter
Forum
Replies
Last Post