Are the threads in the 240sx shifter and our cars the same?
04-30-08, 04:49 PM
#1
Senior Member
Thread Starter
Join Date: May 2005
Location: Seattle
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Are the threads in the 240sx shifter and our cars the same?
04-30-08, 05:13 PM
#3
2 Rotors, 1 Turbo
Join Date: Feb 2004
Location: Atlanta, GA
Posts: 1,099
Likes: 0
Received 0 Likes
on
0 Posts
Give me 10 minutes...
10 minutes later!!!!!!:
Doesn't work. The diameter of the 7's shifter is larger, plus the thread in the 240's shifter is about two inches up the shifter and the 7's is on the bottom. Either way, won't work at all.
10 minutes later!!!!!!:
Doesn't work. The diameter of the 7's shifter is larger, plus the thread in the 240's shifter is about two inches up the shifter and the 7's is on the bottom. Either way, won't work at all.
Last edited by MidnightOwl; 04-30-08 at 05:18 PM.
04-30-08, 08:48 PM
#6
Senior Member
Thread Starter
Join Date: May 2005
Location: Seattle
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
^^ Hmm...but MidnightOwl just tried it on his S4 TII...(thanks btw!)
Oh, and Icemark, this shift **** is weighted
Oh, and Icemark, this shift **** is weighted
Last edited by Healing; 04-30-08 at 08:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
NoMorePoison
2nd Generation Specific (1986-1992)
11
08-18-15 11:18 AM
