2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Are these a direct fit (Marren Injectors)

Old Mar 7, 2010 | 10:19 AM
  #1  
CWynn5's Avatar
Thread Starter
Full Member
iTrader: (9)
 
Joined: Aug 2009
Posts: 102
Likes: 0
From: Sycamore, IL
Are these a direct fit (Marren Injectors)

http://www.injector.com/cart/pc/view...9&idcategory=7

I have an '87 TII with low impedance injectors.
Reply
Old Mar 7, 2010 | 06:32 PM
  #2  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
phone Marren and ask them.The Phone number is on the spec sheet.
Reply
Old Mar 8, 2010 | 11:10 AM
  #3  
lonewolfrx's Avatar
Rotary Enthusiast
Tenured Member: 20 Years
 
Joined: Mar 2003
Posts: 783
Likes: 2
From: Las Vegas
They look like they would drop in by but id call to check. It might drop right in but plug might also be different.
Reply
Old Mar 8, 2010 | 11:23 AM
  #4  
Sideways7's Avatar
Lives on the Forum
Tenured Member: 20 Years
Liked
iTrader: (7)
 
Joined: Dec 2003
Posts: 6,598
Likes: 10
From: Temple, Texas (Central)
Yes, they are drop in - I just bought the 1680 version last week. They are low imp and have the same rectangular, center notch connector.
Reply
Old Mar 8, 2010 | 07:54 PM
  #5  
CWynn5's Avatar
Thread Starter
Full Member
iTrader: (9)
 
Joined: Aug 2009
Posts: 102
Likes: 0
From: Sycamore, IL
Originally Posted by Sideways7
Yes, they are drop in - I just bought the 1680 version last week. They are low imp and have the same rectangular, center notch connector.
Excellent. That's what I needed to know. I found a thread on this board about them and they seem to be a good product. Thanks!
Reply
Old Mar 10, 2010 | 08:37 PM
  #6  
Vr6Jason's Avatar
Junior Member
 
Joined: Feb 2008
Posts: 30
Likes: 0
From: Chesapeake
Originally Posted by CWynn5
Excellent. That's what I needed to know. I found a thread on this board about them and they seem to be a good product. Thanks!
you're talking about using these as your secondaries correct? i think i also just read that old thread, and searched and found this. anyways i'm trying to get way from spending 280$ on the greddy nippon denso injectors.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
andyvideopro
General Rotary Tech Support
3
Aug 20, 2015 10:55 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:25 AM.