thermowax question
09-02-10, 03:48 PM
#3
Junior Member
Thread Starter
Join Date: Aug 2010
Location: sacramento
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
me and my brother's friend were discussing components on the throttle body and i was curious if it would lean out the mixture at all because he is having problems with his car running lean. actually would anything on the throttle body cause this? lol
09-03-10, 01:54 PM
#6
Junior Member
Thread Starter
Join Date: Aug 2010
Location: sacramento
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
yup. Well we checked all that stuff on his car and didn't find anything wrong. but when we checked the pins on his ecu we found a few things.
well quick question, if the IAT sensor on the engine has a higher voltage at the ecu pin then its supposed to (like 3v instead of 1-2) on idle when its fully warmed up, would that make it run lean?
well quick question, if the IAT sensor on the engine has a higher voltage at the ecu pin then its supposed to (like 3v instead of 1-2) on idle when its fully warmed up, would that make it run lean?
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM
