put in some new 1000cc marren secondary injectors, put everything back together and sure enough 1 of them is leaking, so im taking everything back apart and going to the dealer to get a new o-rings and a insulator(bottom groumet), so before i put it together wanted to see if there is a way to check to make sure the injectors are sealed properly

thanx in advance for any info

 

Your new injector didn't come with new o-rings and grommets? I'd call Marren also. You might have a bad one out of the box.

 

leak fuel? you can jump the fuel pump with the yellow 2 pin connector on the right shock tower.

theres about a page on this in the shop manual

 

Inspect the fuel rail injector sockets for any stuck on pieces of old O-rings.
Put a dab of oil on the O-rings when reinstalling the injectors.

Also see that the insulator grommets seal well.
They are a good place for a vac leak.

 

thanx man, this worked like a charm no more leaky injector