tested water thermo sens. Question on result:
05-02-05, 11:21 AM
#1
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Windsor Ontario Canada
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
tested water thermo sens. Question on result:
OK here is FSM specs for water thermo sensor:
Water Temp---------------------Resist.
-20 (-4)-----------------------16.2 - 1.62
20 (68)-----------------------2.45 - 0.24
80 (176)----------------------0.32 - 0.032
My sensor would not fall below 0.3 even when water temps exceeded 200, when according to FSM it should fall well below 0.3 above 176.
You do you guys think? Normal or should I replace?
Can this be responsible for a rich condition?
Water Temp---------------------Resist.
-20 (-4)-----------------------16.2 - 1.62
20 (68)-----------------------2.45 - 0.24
80 (176)----------------------0.32 - 0.032
My sensor would not fall below 0.3 even when water temps exceeded 200, when according to FSM it should fall well below 0.3 above 176.
You do you guys think? Normal or should I replace?
Can this be responsible for a rich condition?
Last edited by kick7ca; 05-02-05 at 11:29 AM.
Thread
Thread Starter
Forum
Replies
Last Post
LunchboxSA22
2nd Generation Specific (1986-1992)
37
10-26-15 10:53 AM