TB Removal now idles high?
06-16-06, 11:58 PM
#1
Got Rotors?
Thread Starter
Join Date: Mar 2002
Location: cambridge, Ontario, Canada
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
TB Removal now idles high?
Is it typical to have to reset idle after a Throttle body removal (no mods to the TB). I did have the throttle cable removed from the cam and am thinking that would be the culprit. I noticed that my cruise control cable is tight to the cam and that the trottle cable has noticeable slack now. My car now idles at 2000 instead of the 750 it used to idle at.
Any help would be appreciated.
Thanks
Any help would be appreciated.
Thanks
10-01-06, 01:17 PM
#3
r o t a r y
iTrader: (2)
Join Date: Jun 2006
Location: Indiana
Posts: 629
Likes: 0
Received 0 Likes
on
0 Posts
I have the exact same problem. When i first noticed the high idle, i just pulled on the throttle cable a bit and the idle was better than ever. now, it idles high again, and i don't know what to do
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM