TB Mod, Ported WG, Idle Surge, Exhaust.
#1
Full Member
Thread Starter
Join Date: Sep 2003
Location: Ohio
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
TB Mod, Ported WG, Idle Surge, Exhaust.
Hey guys! I am now a proud owner of a 1987 T2 RX7 with 100x miles.
Now I have a few questions about it!
When you turn it on, it has the common "cold start" problem, but then the idle surges, is that cuased by a vaccum leak?
Also, I am taking out the TB, should I go ahead and do the TB mod, will I notice a differnce at all?
Also, are there any writeups on ported a WasteGate? IF i remember correctly, once I get a FCD, RB Exhaust, and a Walbro 255lph pump, I would get boost creep. And porting the wastegate would solve that problem.
Also, what about an exhaust? I have herd mixed between BNR, Racingbeat, and CorkSport. Any recomendations?
Now I have a few questions about it!
When you turn it on, it has the common "cold start" problem, but then the idle surges, is that cuased by a vaccum leak?
Also, I am taking out the TB, should I go ahead and do the TB mod, will I notice a differnce at all?
Also, are there any writeups on ported a WasteGate? IF i remember correctly, once I get a FCD, RB Exhaust, and a Walbro 255lph pump, I would get boost creep. And porting the wastegate would solve that problem.
Also, what about an exhaust? I have herd mixed between BNR, Racingbeat, and CorkSport. Any recomendations?
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM
rkhanso
2nd Generation Specific (1986-1992)
1
08-13-15 11:40 AM