Tail shaft spline and bushing???
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Oct 2012
Location: Oklahoma
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Tail shaft spline and bushing???
I've found an rx7 for sale at a good price. He says its not drivable right now because the tail shaft spline and bushing need to be replaced. Where are these located?(pics please) and how hard and exspensive would they be to replace? I'd be willing to do them myself if its not to hard. I do have a Haynes manual for te rx7 if that helps at all.
#3
Rotary Enthusiast
iTrader: (1)
Based on your description it sounds like the transmission would have to be rebuilt. If something traumatized the drivetrain enough to strip the splines it seems reasonable to assume there was collateral damage.
Assuming the engine is ok and the diff is ok, swapping in a new-to-you transmission is straightforward as long as you have a friend. You'd want to replace the clutch, throwout bearing, pilot bearing and surface the flywheel while you're at it. R&Ring the tranny is covered in your Haynes manual.
Assuming the engine is ok and the diff is ok, swapping in a new-to-you transmission is straightforward as long as you have a friend. You'd want to replace the clutch, throwout bearing, pilot bearing and surface the flywheel while you're at it. R&Ring the tranny is covered in your Haynes manual.
#4
Full Member
Thread Starter
iTrader: (1)
Join Date: Oct 2012
Location: Oklahoma
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Thank you. I knew it had something to do with the drive line. I'm tring to get more info from the guy selling but I have yet to hear back from him. Once I get an update I will post it here.
#7
Full Member
Thread Starter
iTrader: (1)
Join Date: Oct 2012
Location: Oklahoma
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Well. I'm asking him and he's telling me that the transmission is perfect. The motor has had a rebuild about 60k ago. He says its the differential and that I can get the parts for $80.